Loading ...
Loading ...
Loading ...
32
Function settings
Timer (Auto-Off timer)
P
Button operation
1
Bring up the Timer setting screen.
(Refer to page 29.)
Select “Auto-Off”, and press the
SELECT
button.
The Auto-Off timer will not work in the following
cases:
when Auto-Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, during function setting,
when the system is centrally controlled (when On/Off
operation or timer operation from local controller is
prohibited).
2
The current settings will appear.
Move the cursor to “Auto-Off” or “Stop in --- min” with
the
F1
or
F2
button.
3
Change the setting with the
F3
or
F4
button.
•
Auto-Off: No (disable)/Yes (enable)
•
Stop in --- min: Timer setting (The settable range is 30 to
240 minutes in 10-minute increments.)
Loading ...
Loading ...
Loading ...