Rockville RXD-M3 User Manual

Loading ...

If your head unit has one single pair of RCA

outputs, input them in to the ampliers Channel

1 and 2 input jacks and set the Input Mode

Switch to 2Ch. The ampliers preamp circuitry

will automatically mix all the channels and

output will occur on all 5 channels. There will be

Left and Right balance with constant subwoofer

but no Front to Read Fader Control.

If your head unit has two pairs of RCA outputs,

input Front Left and Front Right in to amplier

Channels 1 and 2 input jacks. Rear Left and Rear

Right in to ampliers Channels 3 and 4 input

jacks. Set the Input Mode Switch to 4Ch. The

ampliers preamp circuitry will automatically mix

all the channels and output will occur on all 5

channels. There will be Left and Right balance,

Front to Rear Fader with constant subwoofer.

If your head unit has three pairs of RCA outputs,

input Front Left and Front Right in to amplier

Channels 1 and 2 input jacks. Rear Left and

Rear Right in to ampliers Channels 3 and 4

input jacks. Subwoofer output in to Channel 5.

If your head unit has only a single subwoofer

output, use a Y adaptor to feed both Channel 5

inputs. Set the Input Mode Switch to 5Ch. The

ampliers preamp circuitry will automatically

mix all the channels and output will occur on

all 5 channels. There will be Left and Right

balance, Front to Rear Fader with independent

subwoofer.

4 Channel with Dual Mixed Mono Conguration

RXH F5 Channel Input Mode

ALL CROSSOVER SETTINGS IN THIS MODE

SHOULD BE SET TO FULL RANGE.

INPUT MODE SET TO 2 CHANNEL

INPUT MODE SET TO 4 CHANNEL

INPUT MODE SET TO 5 CHANNEL

2 CHANNEL MODE

4 CHANNEL MODE

5 CHANNEL MODE

Loading ...

Rockville RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Amplifier Car Stereo Amp