Loading ...
Loading ...
Loading ...
Getting Started
Introduction
Thank you for purchasing the Membrane Solutions
®
MS18 Air Puri�ier.
Please contact us for the latest product information, including operator
manuals, videos, support materials, and where to purchase items.
.
The MS18 is a durable piece of equipment,with
proper care it will last for many years.This
owner's handbook outlines the installation,
operation, and maintenance requirements to
sustain perfect product performance.
The MS18 features a Primary Filter
and High-Ef�iciency Particulate Air
Filter (HEPA), capturing particles with a
diameter greater than or equal to 0.3 microns.
Website: www.mspurelife.com
Customer Service: [email protected]
Toll-Free Phone: 1-866-528-4572
The MS18 can �ilter out impurities and particles in the air, such as, dust,
pollen, cigarette smoke, pet dander, off-odors, and unhealthy vapors.
2
Step 4
Place the new �ilter into the air puri�ier
making sure it is facing the correct direction.
Air�low travels from outside to the center of
the unit. Reinstall the rear cover
After replacing the �ilter, plug the power cord
back into an electrical outlet, then hold down
the �ilter button for 3 seconds to reset the �ilter
timer, the indicator light will go out showing the
reset was successful.(See Page 8).
Filter Replacement
Step 1
Press the power button to turn the air
puri�ier off, unplug the power cord from
the electrical outlet.
Remove the rear cover of the air puri�ier
and remove the exhausted composite �ilter
element.
Step 2
Clean out any remaining dust, dirt, or lint
inside the puri�ier using a vacuum hose or
dry cloth.
DO NOT use water or liquids to clean the
puri�ier.
Step 3
Remove any packing from the new �ilter
element and take notice of the inward and
outward sides of the �ilter element.
Refer to the new �ilter instructions for the
direction of air�low.
9
Loading ...
Loading ...
Loading ...