Loading ...
Loading ...
Loading ...
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
three PA4 × 25 screws that come with the junction
box.
Figure 2-8 Secure the Junction Box Body
6. Fix the mounting base onto the junction box cover
with two M4 × 10 screws.
Figure 2-9 Fix the Mounting Base
7. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
8. Combine the junction box cover with its body and
secure it with three M3 screws.
Figure 2-10 Combine the Junction Box Cover and Body
9. Connect the power cord and video cable and put
the cables back into the junction box.
10. Refer to step 9 of 2.1.1 Ceiling Mounting Without
Junction Box to adjust the angle and finish the
installation.
2.1.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-11 Fix the Wall Mount
3. Refer to steps 1 and 2 of 2.1.1 Ceiling Mounting
Without Junction Box to dissemble the camera.
4. Use two M4 screws to fix the mounting base onto
the wall mount.
Loading ...
Loading ...
Loading ...