Loading ...
Loading ...
Loading ...
en Descaling
30
21 Descaling
To ensure that your appliance continues to operate cor-
rectly, it must be descaled regularly.
How frequently you need to run the descaling pro-
gramme depends on the water hardness and how
many times you have used the steam-assisted opera-
tions. The appliance indicates when only another 5 or
fewer steam-assisted operations are possible. If you do
not carry out descaling, you can no longer set any op-
eration with steam.
Descaling comprises several steps and takes
approximately 70-95minutes:
¡ Descaling (approx.55-70minutes)
¡ First rinse cycle (approx.8-12minutes)
¡ Second rinse cycle (approx.8-12minutes)
Carry out descaling in full.
If descaling is interrupted, you can no longer set any
operation. To ensure that the appliance is ready for op-
eration again, carry out 2 rinse cycles.
21.1 Preparing descaling
ATTENTION!
The length of time for which the descaler is left to work
is based on the recommended, liquid descaler. Other
descalers may damage the appliance.
▶ Only use the liquid descaler recommended by us
for the descaling programme.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶ Remove descaling solution immediately with water.
1.
Mix the descaling solution:
‒ 200ml liquid descaler
‒ 400ml water
2.
Open the control panel.
3.
Remove the water tank and fill it with descaling solu-
tion.
4.
Once the descaling solution has been poured into
the water tank, slide the tank back in.
5.
Close the control panel.
21.2 Setting the descaling process
ATTENTION!
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶ Remove descaling solution immediately with water.
Requirement:→"Preparing descaling", Page30
1.
Press "Cleaning".
2.
Press "Descaling" .
a The duration appears on the display. You cannot
change the duration of the descaling process.
3.
Press to start the descaling process.
a A notification stating that you should carry out the
necessary preparatory work for descaling appears
on the display.
4.
Press "OK" to confirm the notification.
a The descaling process starts. The duration counts
down on the display.
a Once the descaling programme has run through to
the end, an audible signal sounds.
21.3 Running the first rinse cycle
1.
Open the control panel and remove the water tank.
2.
Thoroughly rinse the water tank and fill it with fresh
water.
3.
Slide in the water tank and close the control panel.
a The rinse cycle starts. The duration counts down on
the display.
a Once the rinse cycle has run through to the end, an
audible signal sounds.
21.4 Running the second rinse cycle
1.
Open the control panel and remove the water tank.
2.
Thoroughly rinse the water tank and fill it with fresh
water.
3.
Slide in the water tank and close the control panel.
a The rinse cycle starts. The duration counts down on
the display.
a Once the rinse cycle has run through to the end, an
audible signal sounds.
4.
Empty and dry the water tank.
→"Emptying the water tank", Page17
22 Drying
To prevent residual moisture , dry the cooking compart-
ment following operation with steam.
22.1 Drying the cooking compartment
WARNING‒Risk of burns!
The appliance becomes hot during operation.
▶ Allow the appliance to cool down before cleaning.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
▶ Do not use the appliance if there is water on the
cooking compartment floor.
▶ Wipe away any water on the cooking compartment
floor before operation.
Requirement:The cooking compartment has cooled
down.
1.
Remove any food remnants from the cooking com-
partment.
2.
Dry the cooking compartment with a sponge.
Loading ...
Loading ...
Loading ...