Loading ...
Loading ...
Loading ...
04 EN EN 05
Remove power cords and small objects from the floor that
may entangle RoboVac.
Fold tasseled edges of rugs underneath to prevent tangling
RoboVac. Avoid cleaning high-pile rugs or rugs thicker than
1.02 in / 26 mm as they may cause RoboVac to malfunction.
It is strongly recommended to place physical barriers or set
a “No-Go” zone via the eufy Clean app in front of fireplaces
and certain areas (i.e. air vents) that may cause damage to
RoboVac if entered.
Avoid vacuuming large amounts of water as it may damage
the device.
RoboVac may climb on top of objects less than 0.75 in / 19
mm in height. Remove these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling
down stairs and steep drops in most cases. Sensors are less
effective if dirty or used on carpeted / reflective floors. Place
physical barriers or set a “No-Go” zone to block off areas
where RoboVac may fall.
Using Your RoboVac
Important Tips Before Use
A B
C
D
E
F
Self-Empty Station / Charging Base
Solid white
Standby
Pulsing white Emptying the dust box
Solid red
Error
• Check if the dust box
is full.
• Check if there is any
air leakage or dust
blockage.
E. Self-Empty Station (T2276 only)
Disposable dust bag
LED indicator
Power socket
Infrared sensor (helps RoboVac
return to Self-Empty Station)
Charging contact pins (×2)
F. Mopping Module
Washable cleaning cloth
Cloth attachment area
LED Indication
You can see the status of RoboVac from the LED indicators.
Button
LED Behavior Description
Solid white
Working normally
Pulsing white
(when attached to
Self-Empty Station /
Charging Base)
Charging
Flashing red RoboVac Error
Solid white
Returning to Self-Empty
Station / Charging Base
Solid white
Spot cleaning mode
Solid white
RoboVac is powered on
Off RoboVac sleeping mode
Loading ...
Loading ...
Loading ...