Loading ...
Loading ...
Loading ...
�Ҹ
18) To exit the Safety Shelter, remove the Locking Pin, unlock the Deadbolt,
move the Black Knurled Door Handle to the left and slide the door open to
the left. Exit the Safety Shelter to a safe location.
19) If for any reason any part of the door latching mechanism becomes damaged
and inoperable causing the door to not open, there is a failsafe relief method
to get the door open. First, rotate and remove the Locking Pin from the Jamb.
Second, there are three Latch Pins in the jamb. Remove the Cotter Pins from
the back of these pins and then pull these three pins out of the jamb. The door
will now open no matter how it is locked. This can only be performed from
inside the Safety Shelter.
20) In the unlikely event that the door or exit path beyond the door becomes
blocked by debris, the Lower and Upper Wall Panel Assembly can be
disassembled from the inside of the Safety Shelter using the supplied Wrench
(PN 20075Y) or similar tools. See pgs 12, 19 and 25 of this manual and the
yellow Emergency Exit Instruction Sheet (PN 20056) for additional
information.
10
Recommended Tools For Assembly:
• Leather Gloves
• Safety Glasses
• Flashlight
• (1) Hammer Drill with 1/2” Carbide Concrete Drill Bits
(Do Not Use Diamond Bits)
• (1) Hammer
• (1) Torque Wrench Capable of 40 Ft-lbs
• (1) 9/16” Open End Wrench or Socket Wrench
• (1) 3/8” Drive X 9/16” Deep Well Socket Wrench & Extension
• (2) 3/4” Open End Wrenches
• (1) 3/4” Deep Well Socket Wrench
• (1) Screwdriver or Punch for Aligning Holes
Note:
The supplied Wrench (PN 20075Y) is
intended to be used in an emergency.
It is not recommended to be used to
assemble the Safety Shelter.
Loading ...
Loading ...
Loading ...