Loading ...
Loading ...
Loading ...
Thermal Imagers
SmartView Software
39
Download SmartView Software
Go to www.fluke.com/smartviewdownload.
1. On the website, follow the instructions to download the software to the PC.
2. On the PC, follow the instructions to install SmartView software. (Administrator privileges
are required for the installation.)
3. Restart the PC when installation is complete.
Download Firmware
1. On the PC, open SmartView software.
2. Connect the USB A connector end of the cable into your PC and the USB Micro B
connector end into the Imager.
Note
Some Imagers have both A and Micro B connector jacks. Make sure to use the
Micro B jack on the Imager.
Windows automatically installs the device driver for use with the Imager. SmartView
software recognizes the connection with the Imager and appears on the SmartView
software toolbar menu.
3. On the PC, select Yes if prompted to download a firmware update file onto the PC.
4. On the camera, once the firmware is downloaded, select Update Firmware, to update the
firmware in the camera.
To complete the firmware update, the Imager turns off.
5. To use the new firmware, turn on the Imager.
Enable the Radio
In countries with laws and regulations that permit wireless communications, wireless
communication protocols are available to expand the capabilities of the Imager. All Imagers
ship from the factory with the radios disabled.
To enable the radio:
1. On the Imager, select Camera > Fluke Connect.
2. On the PC, go to http://fluke.com/register/ti.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...