Loading ...
Loading ...
Loading ...
BISSELL.com 5
Three Modes of Cleaning
Visit support.BISSELL.com for how-to videos.
Startup
• This appliance is primarily a carpet cleaner with a steam-cleaning feature.
• Remove any solids and use a dry vacuum cleaner over area before using your deep cleaner.
• To prevent damage to Berber carpets, avoid repeated strokes in the same area. Before
cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug for
colorfastness. Do not use on silk or delicate rugs.
• Stay off carpet until dry.
1. Plug into a properly
grounded outlet. Press power
button on handle to turn ON.
2. Water heater will turn on. Machine defaults to Steamwash Max
mode with brush rolls and vacuum motor on. Foot icon will blink
and turn solid when heater is ready to make steam (<60 seconds).
Pretreat with Steam
Loosen tough stains before removing with SteamWash Max Clean mode. Brush rolls and vacuum
motor will shut off in this mode.
1. Press mode button until
Pretreat icon is illuminated.
Icon will blink until heater is
ready to make steam.
2. Press recline pedal to
recline machine. Pull trigger
to release steam and move
machine forward and back
over stain for 20 seconds.
3. After steam pretreat, press
mode button to clean the stain
in SteamWash Max mode.
CONTINUED ON NEXT PAGE
Loading ...
Loading ...
Loading ...