Loading ...
Loading ...
Loading ...
BISSELL.com 11
Replacing the Belts and Brush Rolls
Scan the QR code for a how-to video.
1. Unplug machine and remove
both tanks. While reclined, lay
machine on its front.
2. Remove belt cover. Use
Phillips-head screwdriver to
remove three screws.
3. Use Phillips-head
screwdriver to remove two
screws. Then remove brush roll
assembly by unhooking belt.
4. If flat belt is broken, place
a new belt around red pulley.
Stretch belt toward back of
machine and around metal
shaft.
5. If brush roll belts or brush
roll assembly is broken, replace
with new brush roll assembly.
6. Reinstall brush roll
assembly, making sure to loop
belt over the shaft. Reinstall
belt cover.
WARNING To reduce the risk of injury, do not touch the steam cleaning nozzle or adjacent surfaces when
steam-cleaning or when the nozzle is heated.
Troubleshooting
Visit support.BISSELL.com or scan the QR code with your
smartphone camera for troubleshooting.
Note: Any other servicing should be performed by an authorized
service representative.
Limited 5-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691
for complete warranty information.
Warranty
Loading ...