STRIP LIGHT CONTROLLER
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. The
products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the
warranty. This product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
WARNING!
FEATURES
RGB WIRING DIAGRAM
RGB LED CONTROLLER
1. Please make sure to turn off the power before starting the installation.
2. Installation should only be done by a certified electrician.
3. For Indoor use only
4. Please check whether the voltage of the power supply is in accordance with the controller, and please check
the connection of both the cathode and anode, otherwise the controller will be broken.
5. Please don't connect wires with power on. Please turn it on again only when it is in the right connection and
no short circuit.
6. Please do not use the controller in a place with a wide range of metal areas or strong electromagnetic
waves nearby, otherwise, the remote distance will be seriously affected.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
SIGNAL TRANSMITTING
One strip controller can transmit the signals from the remote control to another controller within 30m, as
long as there is a strip controller within 30m, the remote control distance can be limitless.
MODES SYNCHRONIZATION
Different controllers can work synchronously when they are started at different times, controlled by the
same remote, under same dynamic mode and within 30m distance.
Compatible with the below devices (Not included; available to buy separately)
TECHNICAL DATA:
2
YEARS
WARRANTY
*
MODEL VT-2432
CONTROL DISTANCE 30M
INPUT VOLTAGE DC12V~24V
TOTAL OUTPUT MAX 12A
RF 2.4GHz
OPERATION
TEMPERATURE
-10°C to +40°C
DIMENSION
74.5x36x17mm
VT-2434
30M
DC12V~24V
MAX 12A
2.4GHz
-10°C to +40°C
74.5x36x17mm
FEATURES
RGBW WIRING DIAGRAM
DYNAMIC MODE TABLE 1 (DEFAULT) DYNAMIC MODE TABLE 2
(NEED TO SWITCH MANUALLY)
RGBW LED CONTROLLER
LINKING/UNLINKING
Light will work after linking with remote control;
for more details, please read the remote instruction.
(SKU: 2921
VT-2438)
(NOT INCLUDED)
(SKU: 2922
VT-2441)
(NOT INCLUDED)
(SKU: 2923
VT-2442)
(NOT INCLUDED)
(SKU: 2917
VT-2437)
(NOT INCLUDED)
No Dynamic Mode
Brightness /
Saturation /
Speed
1 Mardi Gras
2 Automatic color change
3 Sam
4 Gemstone
5 Twilight
6 American
7 Fat Tuesday
8 Party
9 Slow Color Splash
Adjustable
No Dynamic Mode
Brightness /
Saturation /
Speed
1 Color gradual change
2 White light gradual change
3 RGB gradual change
4 Seven colors jump to change
5 Jump to change randomly
6
Red light gradual change
+Flash 3 times
7
Red light gradual change
+Flash 3 times
8
Red light gradual change
+Flash 3 times
9
Red light gradual change
+Flash 3 times
Adjustable
The same dynamic mode, the same speed can be synchronized.
PWM HIGH FREQUENCY / LOW FREQUENCY SWITCHING
SWITCH TO HIGH FREQUENCY (8KHZ): on the condition of turning on the light
1. Short press the "OFF" button of the remote control once;
2. Short press the "ON" button 5 times within 3 seconds, the white light blink 2 times quickly, indicating
successfully.
SWITCH TO LOW FREQUENCY (500HZ): on the condition of turning off the light
1. Short press the "ON" button of the remote control once;
2. Short press the "OFF" button 5 limes within 3 seconds, the white light blink 2 times slowly, indicating
successfully.
DYNAMIC MODE TABLE SELECTION
SELECT DYNAMIC MODE TABLE 1: The controller is powered off for 10 seconds and then powered on.
Within 3 seconds, press the "S+ " button 5 times, the blue light blink 3 times slowly, indicating successfully.
SELECT DYNAMIC MODE TABLE 2: The controller is powered off for 10 seconds and then powered on.
Within 3 seconds, press the "S-"key 5 times, and the yellow light blink 3 times slowly, indicating successfully.
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
VT-2432
VT-2434
