Loading ...
Loading ...
Loading ...
• Scan list member has been disabled through the menu.
• You are already participating in another call.
NOTE: If your radio joins a call for a Zone Scan List member from a different Zone and Call
Hang Timer expires before you are able to respond, in order to respond, you must navigate to
the Zone and Channel of the Scan List Member and start a new call.
10.8.1
Turning the Scan On
Procedure:
From the menu, select Scan→Turn On.
If scan is turned on, your radio shows the following indications:
• The yellow LED blinks.
• The display shows Scan On and the scan icon.
10.8.2
Turning the Scan Off
Procedure:
From the menu, select Scan→Turn Off.
If scan is turned off, your radio shows the following indications:
• The LED extinguishes.
• The display shows Scan Off and the scan icon disappears.
10.8.3
Scan Talkback
The Talkback feature allows you to respond to a transmission while scanning.
Depending on how you configure the Scan Talkback feature, you will see two different scenarios if you
press the PTT button when your radio scans into a call from the selectable group scan list.
Table 17: Scan Talkback Type
Type Description
Scan Talkback Disabled During an ongoing scanned call, if the PTT but-
ton is pressed, the scanned call is terminated
and a new call is launched.
MN008336A01-AA
Chapter 10 : Advanced Features
33
Loading ...
Loading ...
Loading ...