Loading ...
Loading ...
Loading ...
3.3
Removing the Battery
Prerequisites: Ensure that your radio is turned off.
Procedure:
Move the battery latch into unlock position and hold, and slide the battery down and off the rails.
3.4
Attaching the Antenna
Procedure:
1 Set the antenna in the receptacle.
2 Turn the antenna clockwise.
NOTE: Fastening the antenna blocks water and dust from entering the radio.
CAUTION: To prevent damages, replace the faulty antenna with only MOTOTRBO
antennas.
3.5
Removing the Antenna
Procedure:
1 Turn the antenna counterclockwise.
2 Remove the antenna from the receptacle.
3.6
Attaching the Belt Clip
Procedure:
1 Align the grooves on the clip with the grooves on the battery.
2 Press the belt clip downward until you hear a click sound.
3.7
Removing the Belt Clip
Procedure:
1 Press the belt clip tab away from the battery.
2 Slide the clip upward and away from the radio.
3.8
Turning the Radio On
Procedure:
Turn the On/Off/Volume knob clockwise until a click sounds.
If your radio is turned on, your radio shows the following indications:
MN008336A01-AA
Chapter 3 : Getting Started
11
Loading ...
Loading ...
Loading ...