DS-3E1106P-EI/M User Manual

Loading ...

Figure 2-3 Add Device

3. Select OTAP as Adding Mode.

4. Enter the required

informaon.

Name

Enter a descripve name for the device.

IP Address

Enter the IP address of the device.

Port

Set the port number of the device. The default port number

is 80.

User Name

Enter the user name set when the device is

acvated. By

default, the user name is admin.

Password

Enter the password set when the device is acvated.

5. Oponal: Check TLS to enable transmission encrypon using

TLS (Transport Layer Security) protocol for security purposes.

Note

●

This funcon should be supported by the device.

●

The client does not support security cercate

authencaon. Imporng a trusted device cercate is not

required. You only need to set Enhanced SDK Service Port

(443 by default) to enable transmission

encrypon.

6. Check Synchronize Time to synchronize the device me with

the PC running the client.

7. Oponal: Check Import to Group to create a group by device

name, and import all channels of the device to this group.

8. Click Add to

nish device adding, or click Add and New to

connue adding another device.

Loading ...

Hikvision DS-3E1106P-EI/M 4 Port Fast Ethernet Smart POE Switch