DS-3E1106P-EI/M User Manual

Loading ...

Figure 2-2 Acvate Device

5. Create a password in the password eld, and conrm the

password.

Note

●

The password strength of the device can be automacally

checked. We highly recommend you change the password of

your own choosing (using a minimum of 8 characters,

including at least three kinds of the following categories:

uppercase leers, lowercase leers, digits, and special

characters) in order to increase the security of your product.

And we recommend you change your password regularly,

especially in the high security system. Changing the

password monthly or weekly can

beer protect your

product.

●

The password cannot contain "admin" or its reverse.

●

Proper

conguraon of all passwords and other security

sengs is the responsibility of the installer and/or end-user.

6. Oponal: Check Enable Hik-Connect if the device supports Hik-

Connect service.

7. Click OK.

Note

Aer the device is acvated, you can click or in the

Operaon column of the online device list to modify network

parameters or reset the password of the device.

2.2 Add Device

Aer the device is acvated, you can add it to the client in OTAP

mode for remote conguraon and management.

Before You Start

Obtain the IP address, user name, and password of the device to

be added.

Steps

1. Click Device Management → Device.

2. Click Add.

Loading ...

Hikvision DS-3E1106P-EI/M 4 Port Fast Ethernet Smart POE Switch