Loading ...
Loading ...
Loading ...
en HomeConnect
20
Appliance set-
tings
Selection
Pull-out system ¡ Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
1
¡ Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
Lighting ¡ When cooking and when the door
is opened
1
¡ Only when the door is opened
¡ Always off
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Brand logo ¡ Display
1
¡ Do not display
Operation after
switch-on
¡ Main menu
1
¡ Types of heating
¡ Dishes
¡ Favourites
Elapsed cook-
ing time
¡ Do not display
¡ Display
1
Regional
dishes
¡ All
1
¡ European dishes
¡ British dishes
Dishes ¡ All
1
¡ No pork
¡ Kosher only
Childproof
lock
¡ Door lock + keylock
¡ Button lock only
1
¡ Deactivated
Automatic
rapid heating
¡ off
¡ On
1
1
Factory setting (may vary according to model)
Factory set-
tings
Selection
Factory set-
tings
¡ Restore
Info Display
Appliance in-
formation
Display technical information about
the appliance.
16.2 Changing the basic settings
1.
Press "Basic settings" in the menu.
2.
Press the required basic settings area.
3.
Press the required basic setting.
4.
Press to select the required basic setting.
a The change is applied directly for most basic set-
tings.
5.
To change additional basic settings, use to go
back and select a different basic setting.
6.
To exit the basic settings, use to go back to the
main menu or switch off the appliance using .
a The changes are saved.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
16.3 Setting the time
1.
Press "Basic settings" in the menu.
2.
Press "Time".
3.
To set the time, press the hour display or the minute
display.
a The selected value is marked in blue.
4.
Use the setting ring to set the time.
‒ The minutes are counted in 5-minute increments.
To set it to the precise minute, press and hold
the corresponding area in the setting ring for
around 1-2 seconds. The minutes are shown in
dots. Use the setting ring to set the minutes.
5.
To exit the basic settings, use to go back to the
main menu or switch off the appliance using .
a The time is saved.
17 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
HomeConnect.
¡ Please also follow the instructions in the HomeCon-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡ In networked standby mode, the appliance requires
a maximum of2W.
Loading ...
Loading ...
Loading ...