Loading ...
Loading ...
Loading ...
Electrical connection
CAREFUL:
• Connection to the mains must comply with local rules and regulations.
• Incorrect connection can cause electrocution!
• Do not modify the appliance's plug. If the plug does not fit properly into the outlet, have the correct outlet installed
by an authorized service technician.
• Accessibility to the socket must be ensured so that the device can be disconnected from the power supply in an
emergency.
• Make sure your power supply matches the device's specifications. Specifications are indicated on the rating plate.
• Plug the power cord into a properly wired and grounded wall outlet.
• If after installation the plug is no longer accessible, a suitable disconnecting device must be installed to comply with
current legislation.
Operation/ functioning
Decorative hood
> The bottom diameter of pots and pans must be adjusted to the size of the cooking zone.
> Use pots and pans with flat bottoms, as uneven bottoms increase energy consumption.
> Check that there is a sufficient air source for the hood to work. Adjust the fan power to the evolution of steam
generation during the cooking process.
> For optimal hood performance, install it in accordance with the installation instructions.
> Keep the distance between the upper edge of the kitchen and the lower edge of the hood.
Clean the filter regularly.
> Regularly check the activated carbon filter and replace it if necessary. Turn off the hood after use.
If your hood has an off timer, activate this function. Turn off the light after cooking.
We recommend using products from biological cleaning.
Safe disassembly information for maintenance
Remove the filter and bulbs as described in the manual.
No other measures are foreseen for dismantling for maintenance. If you want to exchange faulty
components, please contact our customer service.
Batteries not included.
Disassembly information for recycling, recovery and disposal of the device at the end of its life
Make sure the unit is disconnected from the power supply before removing any hood filters.
First remove the chimney.
When dismantling the cover, do not forget to unscrew the lower screws first, and then the upper
ones.
For recycling and recovery of device resources, take the bulbs and various filters to:
- a public authority collection point for waste disposal
- a company specializing in the disposal
37
Loading ...
Loading ...
Loading ...