1
2
3
4
5
6
7
English
IMPORTANT SAFETY INSTRUCTIONS
When using an electric product, basic precautions
should always be followed, including the following:
Read all instructions before using this product.
DANGER
To reduce the risk of electric shock:
- To charge the product, only use a USB power
source on a certied product with output
rating 5V, ≥ 1A. For safe charging in a moist
environment (e.g. in a bathroom), only use an IPX4
(splash-proof) power source. A suitable power
source (e.g. Philips HQ87) is available via www.
philips.com/support. If you need support nding
the correct USB power source, contact Philips
support at 1-800-243-3050. Using a non-certied
USB power source may cause hazards or serious
injuries.
- Keep the USB cable and the USB power source dry.
- Do not reach for a corded product that has fallen
into water. Unplug immediately from the power
outlet.
- Do not place or store the product where it can
fall or be pulled into a tub or sink. Do not place or
drop the product into water or other liquid.
- This product does not work while it is connected
to the power outlet. Except when charging, always
unplug this product from the power outlet.
- Remove USB power source from power outlet and
product before cleaning.
WARNING
To reduce the risk of burns, re, electric shock, or
injury to persons:
- This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
product by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the product.
- Use this product only for its intended household
use as described in this manual. Misuse can lead to
hazards or serious injuries. Do not use attachments
not recommended by Philips North America
LLC. Accessories supplied may vary for dierent
products.
- Never operate this product if it has a damaged
USB power source, if it is not working properly,
after it has been dropped or damaged, or after
the product or the USB power source has been
dropped into water. For assistance call 1-800-243-
3050.
- Keep the USB cable and the USB power source
away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not use the USB power source in or near a
power outlet that contains an electric air freshener
to prevent damage to the USB power source.
- Do not use product outdoors or operate where
aerosol (spray) products are being used or where
oxygen is being administered.
- Always check shaving heads (guards and cutters)
before using the product. Do not use the product
if cutters or guards are damaged, as injury may
occur.
- Always attach the USB cable to the USB power
source and the product rst, then attach the USB
power source to the power outlet. To disconnect,
set all controls to 'o' position. Then remove the
USB power source from the power outlet.
- Plug USB power source directly into power outlet.
Do not use an extension cord.
- Unplug USB power source before plugging in or
unplugging the product.
- The batteries used in this product may present
a re or chemical burn hazard if mistreated. Do
not disassemble, heat above 100°C (212°F) or
incinerate.
- Only use original Philips accessories or
consumables.
- Charge, use and store the product
at a temperature between
40 °F / 4.5°C and 95 °F / 35°C.
- Keep product and batteries away from re and
do not expose them to direct sunlight or high
temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than
usual, stop using and charging the product and
contact Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle
the product or battery to prevent batteries
from heating up or releasing toxic or hazardous
substances. Do not short-circuit, overcharge or
reverse charge batteries.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately
rinse well with water and seek medical care.
- When you handle batteries, make sure that your
hands, the product and the batteries are dry.
1
- To avoid accidental short-circuiting of batteries
after removal, do not let battery terminals come
into contact with metal objects (e.g. coins,
hairpins, rings). Do not wrap batteries in aluminum
foil. Tape battery terminals or put batteries in a
plastic bag before you discard them.
SAVE THESE INSTRUCTIONS
Introduction
Congratulations on your purchase and welcome to
Philips Norelco!
To fully benet from the support that Philips
Norelco oers, register your product at
www.philips.com/register.
General description (Fig. 1)
1 Protective cap
2 Shaving unit
3 On/o button
4 Charging light
5 Travel lock indicator
6 USB cable
Note: A suitable power source (e.g. Philips HQ87)
is available via www.philips.com/support.
7 Travel case
Charge indications
Battery low
When the battery is almost empty (when there are
only 5 or fewer shaving minutes left), the charging
light ashes orange (Fig. 2).
Charging
When the shaver is charging, the charging light
ashes white (Fig. 2).
Battery fully charged
When the battery is fully charged, the charging light
lights up white continuously.
Note: After approx. 30 minutes, the charging light
goes out to save energy.
Quick charge
When you start charging the empty battery, the
charging light ashes white quickly. After approx. 5
minutes the charging light ashes white slowly. The
shaver now contains enough energy for a 5-minute
shave.
Charging
- If the product is subjected to a major change
in temperature, pressure or humidity, let it
acclimatize for 30 minutes before using.
- Do not charge the shaver in a pouch or travel case.
Charge the shaver before you use it for the rst time
and when the charging light indicates that the battery
is almost empty.
- Charging takes approx. 1 hour.
- Quick charge: After approx. 5 minutes of charging,
the battery contains enough energy for a 5-minute
shave.
- When the product is fully charged it has a cordless
operating time of up to 60 minutes.
Note: You cannot use the product while it is charging.
Danger: Keep the USB cable and the USB power
source dry.
Charging with a USB power source
1 Make sure that the product is switched o.
2 Insert the small plug of the USB cable into the
socket in the bottom of the product.
3 Insert the USB plug into the USB power source (not
included) (Fig. 3).
4 Insert the USB power source into the power outlet
(Fig. 4).
5 The charging light on the product will indicate the
charging status (see 'Charge indications').
6 After charging, remove the USB power source
from the power outlet and pull the small plug out
of the product.
Using the product
Always check the product and all accessories
before using. Do not use the product or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
This product is only intended for household use.
For hygienic reasons, the product should only be
used by one person.
Note: This product is waterproof (Fig. 5). It is suitable
for use in the bath or shower and for cleaning under
the tap with water. For safety reasons, this product
can only be used without cord.
BC
PQ888P
Q
88
8
Manufactured for: Philips Personal Health
a division of Philips North America LLC
P.O. Box 10313, Stamford, CT 06904, USA
This symbol on the product’s nameplate means it is
listed by Underwriters’ Laboratories, Inc.
Norelco is a registered trademark of Philips North America
LLC.
PHILIPS and Philips shield are registered trademarks of
Koninklijke Philips N.V.
©2024 Philips North America LLC. All rights reserved.
3000.130.1069.2 (28/05/2024)
2
NOT INCLUDED
3
NOT INCLUDED
4
5
6
7
8
3
sec
9
2
1
10
11
12
13
1
2
14
15
16
17
2
1
18
19
20
21
>75 % recycled paper
>75 % papier recyclé
1
2
3
4
5
6
7
English
IMPORTANT SAFETY INSTRUCTIONS
When using an electric product, basic precautions
should always be followed, including the following:
Read all instructions before using this product.
DANGER
To reduce the risk of electric shock:
- To charge the product, only use a USB power
source on a certied product with output
rating 5V, ≥ 1A. For safe charging in a moist
environment (e.g. in a bathroom), only use an IPX4
(splash-proof) power source. A suitable power
source (e.g. Philips HQ87) is available via www.
philips.com/support. If you need support nding
the correct USB power source, contact Philips
support at 1-800-243-3050. Using a non-certied
USB power source may cause hazards or serious
injuries.
- Keep the USB cable and the USB power source dry.
- Do not reach for a corded product that has fallen
into water. Unplug immediately from the power
outlet.
- Do not place or store the product where it can
fall or be pulled into a tub or sink. Do not place or
drop the product into water or other liquid.
- This product does not work while it is connected
to the power outlet. Except when charging, always
unplug this product from the power outlet.
- Remove USB power source from power outlet and
product before cleaning.
WARNING
To reduce the risk of burns, re, electric shock, or
injury to persons:
- This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
product by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the product.
- Use this product only for its intended household
use as described in this manual. Misuse can lead to
hazards or serious injuries. Do not use attachments
not recommended by Philips North America
LLC. Accessories supplied may vary for dierent
products.
- Never operate this product if it has a damaged
USB power source, if it is not working properly,
after it has been dropped or damaged, or after
the product or the USB power source has been
dropped into water. For assistance call 1-800-243-
3050.
- Keep the USB cable and the USB power source
away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not use the USB power source in or near a
power outlet that contains an electric air freshener
to prevent damage to the USB power source.
- Do not use product outdoors or operate where
aerosol (spray) products are being used or where
oxygen is being administered.
- Always check shaving heads (guards and cutters)
before using the product. Do not use the product
if cutters or guards are damaged, as injury may
occur.
- Always attach the USB cable to the USB power
source and the product rst, then attach the USB
power source to the power outlet. To disconnect,
set all controls to 'o' position. Then remove the
USB power source from the power outlet.
- Plug USB power source directly into power outlet.
Do not use an extension cord.
- Unplug USB power source before plugging in or
unplugging the product.
- The batteries used in this product may present
a re or chemical burn hazard if mistreated. Do
not disassemble, heat above 100°C (212°F) or
incinerate.
- Only use original Philips accessories or
consumables.
- Charge, use and store the product
at a temperature between
40 °F / 4.5°C and 95 °F / 35°C.
- Keep product and batteries away from re and
do not expose them to direct sunlight or high
temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than
usual, stop using and charging the product and
contact Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle
the product or battery to prevent batteries
from heating up or releasing toxic or hazardous
substances. Do not short-circuit, overcharge or
reverse charge batteries.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately
rinse well with water and seek medical care.
- When you handle batteries, make sure that your
hands, the product and the batteries are dry.
1
- To avoid accidental short-circuiting of batteries
after removal, do not let battery terminals come
into contact with metal objects (e.g. coins,
hairpins, rings). Do not wrap batteries in aluminum
foil. Tape battery terminals or put batteries in a
plastic bag before you discard them.
SAVE THESE INSTRUCTIONS
Introduction
Congratulations on your purchase and welcome to
Philips Norelco!
To fully benet from the support that Philips
Norelco oers, register your product at
www.philips.com/register.
General description (Fig. 1)
1 Protective cap
2 Shaving unit
3 On/o button
4 Charging light
5 Travel lock indicator
6 USB cable
Note: A suitable power source (e.g. Philips HQ87)
is available via www.philips.com/support.
7 Travel case
Charge indications
Battery low
When the battery is almost empty (when there are
only 5 or fewer shaving minutes left), the charging
light ashes orange (Fig. 2).
Charging
When the shaver is charging, the charging light
ashes white (Fig. 2).
Battery fully charged
When the battery is fully charged, the charging light
lights up white continuously.
Note: After approx. 30 minutes, the charging light
goes out to save energy.
Quick charge
When you start charging the empty battery, the
charging light ashes white quickly. After approx. 5
minutes the charging light ashes white slowly. The
shaver now contains enough energy for a 5-minute
shave.
Charging
- If the product is subjected to a major change
in temperature, pressure or humidity, let it
acclimatize for 30 minutes before using.
- Do not charge the shaver in a pouch or travel case.
Charge the shaver before you use it for the rst time
and when the charging light indicates that the battery
is almost empty.
- Charging takes approx. 1 hour.
- Quick charge: After approx. 5 minutes of charging,
the battery contains enough energy for a 5-minute
shave.
- When the product is fully charged it has a cordless
operating time of up to 60 minutes.
Note: You cannot use the product while it is charging.
Danger: Keep the USB cable and the USB power
source dry.
Charging with a USB power source
1 Make sure that the product is switched o.
2 Insert the small plug of the USB cable into the
socket in the bottom of the product.
3 Insert the USB plug into the USB power source (not
included) (Fig. 3).
4 Insert the USB power source into the power outlet
(Fig. 4).
5 The charging light on the product will indicate the
charging status (see 'Charge indications').
6 After charging, remove the USB power source
from the power outlet and pull the small plug out
of the product.
Using the product
Always check the product and all accessories
before using. Do not use the product or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
This product is only intended for household use.
For hygienic reasons, the product should only be
used by one person.
Note: This product is waterproof (Fig. 5). It is suitable
for use in the bath or shower and for cleaning under
the tap with water. For safety reasons, this product
can only be used without cord.
BC
PQ888P
Q
88
8
Manufactured for: Philips Personal Health
a division of Philips North America LLC
P.O. Box 10313, Stamford, CT 06904, USA
This symbol on the product’s nameplate means it is
listed by Underwriters’ Laboratories, Inc.
Norelco is a registered trademark of Philips North America
LLC.
PHILIPS and Philips shield are registered trademarks of
Koninklijke Philips N.V.
©2024 Philips North America LLC. All rights reserved.
3000.130.1069.2 (28/05/2024)
2
NOT INCLUDED
3
NOT INCLUDED
4
5
6
7
8
3
sec
9
2
1
10
11
12
13
1
2
14
15
16
17
2
1
18
19
20
21
>75 % recycled paper
>75 % papier recyclé
Switching the product on and o
To switch the product on or o, press the on/o
button once (Fig. 6).
Shaving
For the best results on skin comfort, pre-trim your
beard if you have not shaved for 3 days or longer.
You can use this product either wet or dry, or even in
the shower. For a wet shave, apply some water and
shaving foam or gel to your skin and rinse the
shaving heads under the tap with warm water before
following the steps below.
1 Switch on the shaver.
2 Move the shaver in circular movements over your
skin to catch hair growing in all directions (Fig. 7).
Make sure each shaving head is fully in contact
with the skin. Exert gentle pressure for a close,
comfortable shave.
Note: Do not press too hard, as this can cause skin
irritation.
Note: If you are shaving with gel or foam, rinse the
shaving unit regularly during your shave to ensure
that it continues to glide smoothly over your skin
(Fig. 8).
3 Switch o and clean the product after each use
(see 'Cleaning and maintenance').
4 Put the protective cap on the product to protect
the shaving heads during storage and travel.
Note: Make sure you rinse all foam or shaving gel o
the product.
21-Day adaptation process
- 21 Day Trial and Conversion Process. It is a fact that
your skin and beard need time to adjust to a new
grooming system.
- Use your new shaver exclusively for 3 weeks to
fully enjoy the closeness of a Philips Norelco shave.
- At rst you may not get as close a shave as you
expect, or your face may even become slightly
irritated. This is normal since your beard and skin
will need time to adjust. Invest 3 weeks and you'll
soon experience the full joy of your new shaver.
- Stick with it! If you alternate shaving methods
during the adjustment period, it may make it more
dicult to adapt to the Philips Norelco shaving
system.
- If you are still not convinced after 21 days, Philips
Norelco will refund you the full purchase price as
long as the request is received within 45 days of
purchase.
Travel lock
You can lock the shaver when you are going to travel
to prevent it from switching on accidentally.
Activating the travel lock
Press the on/o button for 3 seconds to use the travel
lock mode (Fig. 9). When you activate the travel lock,
the travel lock indicator ashes and then goes out.
Deactivating the travel lock
Press the on/o button for 3 seconds (Fig. 9). When
you deactivate the travel lock, the travel lock indicator
ashes and then goes out. Once the travel lock is
deactivated, the shaver switches on automatically.
Note: The shaver unlocks automatically when it is
connected to a power outlet.
Cleaning and maintenance
Regular cleaning guarantees better shaving results.
Never clean, remove or replace the shaving unit
while the shaver is switched on.
Do not touch shaving heads with hard objects
as this may dent or damage the precision-made
slotted shaving head.
Do not use abrasives, scourers or aggressive liquids
such as gasoline or acetone to clean the shaver.
Cleaning the shaver
Always check if the water is too hot, to prevent
burning your hands.
Clean the shaver after every shave for optimal shaving
performance.
While rinsing shaving heads, water may drip out
of the base of shaver. This is a normal occurrence.
Internal electric parts are in a waterproof
compartment so the shaver will be protected against
water damage.
1 Press the on/o button once to switch on the
product (Fig. 6). Rinse the shaving unit with cold or
lukewarm water (Fig. 8).
2 Press the on/o button to switch o the product.
Pull the shaving unit o the shaver (Fig. 10).
3 Rinse the shaving unit and hair chamber with
lukewarm water (Fig. 11).
4 Carefully shake o excess water and let the shaver
air dry.
Never dry the shaving unit with a towel or
tissue, as this may damage the shaving heads
(Fig. 12).
5 Put the shaving unit back onto the shaver (Fig. 13).
Thorough cleaning
Clean the shaving heads thoroughly once a month for
optimal performance.
1 Switch o the shaver.
2 Pull the shaving unit o the shaver (Fig. 10).
3 Rinse the shaving unit and hair chamber with
lukewarm water (Fig. 11).
4 Turn the lock counterclockwise and remove the
retaining frame. Place it aside in a safe place
(Fig. 14).
5 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a guard
(Fig. 15).
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and guards,
it may take several weeks before optimal shaving
performance is restored.
6 Remove the cutter from the shaving guard and
clean both parts under the tap (Fig. 16).
7 Put the cutter back into the guard.
8 Put the shaving heads back into the shaving unit
(Fig. 17).
9 Put the retaining frame back into the shaving unit
and turn the lock clockwise (Fig. 18).
10 Put the shaving unit back onto the shaver (Fig. 13).
Note: If you cannot attach the shaving unit onto
the shaver easily, check if you have inserted the
shaving heads properly and if the retaining frame
is locked.
Replacement
Replacing the shaving heads
For maximum shaving performance, replace the
shaving heads once a year (Fig. 19). Replace damaged
shaving heads immediately.
Always replace the shaving heads with original Philips
Norelco shaving heads (see 'Accessories').
1 Switch o the shaver.
2 Pull the shaving unit o the shaver (Fig. 10).
3 Turn the lock counterclockwise and remove the
retaining frame. Place it aside in a safe place
(Fig. 14).
4 Remove the shaving heads from the shaving unit.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads
(Fig. 20).
5 Place new shaving heads in the shaving unit
(Fig. 17).
6 Put the retaining frame back into the shaving unit
and turn the lock clockwise (Fig. 18).
7 Put the shaving unit back onto the shaver (Fig. 13).
Note: If you cannot attach the shaving unit onto
the shaver easily, check if you have inserted the
shaving heads properly and if the retaining frame
is locked.
This product has no other user-serviceable parts. For
assistance call 1-800-243-3050.
Storage
- Make sure the product is switched o. Remove the
USB power source from the power outlet and the
product before storing the product in a safe, dry
location where it will not be crushed, banged, or
subject to damage.
- Do not wrap cord around the product when
storing.
- Store cord and other accessories in a safe location
where these will not be cut or damaged.
- Do not place or store the product where it can
fall or be pulled into a tub or sink, water or other
liquid while plugged in.
Put the protective cap on the shaver to prevent
damage.
Note: Always let the shaver dry completely before
storing.
Storage in travel case
Store the shaver in the travel case supplied.
Note: Make sure the shaver is dry before you store it in
the travel case.
Accessories
Replacement parts and accessories may be
purchased at a store near you or on our website
www.philips.com/store.
The following accessory is available:
- SH30 Philips Norelco replacement shaving heads
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free 1-800-
243-3050.
Disposal
- This product contains a rechargeable lithium-ion
battery which must be disposed of properly.
- Contact your local town or city ocials for battery
disposal information. You can also call 1-800-822-
8837 or visit: www.call2recycle.org for battery
drop-o locations (Fig. 21).
- For assistance, visit our website
www.philips.com/support or call 1-800-243-
3050 toll free.
- Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused. For recycling information,
please contact your local waste management
facilities or visit: www.recycle.philips.com.
FCC Compliance Information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference,
and
2 This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receive.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Full Two-Year Warranty
Philips North America LLC warrants this new product
against defects in materials or workmanship for a
period of two years from the date of purchase, and
agrees to repair or replace any defective product
without charge.
IMPORTANT: This warranty does not cover damage
resulting from accident, misuse or abuse, lack of
reasonable care, the axing of any attachment
not provided with the product or loss of parts or
subjecting the product to any but the specied
voltage.*
The shaving heads (cutters and guards) are not
covered by the terms of this warranty because they
are subject to wear and tear.
NO RESPONSIBILITY IS ASSUMED FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
In order to obtain warranty service, simply go to
www.philips.com/support. It is suggested that for
your protection you return shipments of product by
insured mail, insurance prepaid. Damage occurring
during shipment is not covered by this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
This warranty gives you specic legal rights, and you
may also have other rights which vary from state
to state. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so
the above exclusion and limitations may not apply to
you.
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
If you are not fully satised with your product send
the product back and we’ll refund you the full
purchase price.
The product must be shipped prepaid by insured
mail, insurance prepaid, have the original sales
receipt, indicating purchase price and date of
purchase.
We cannot be responsible for lost mail.
The product must be postmarked no later than 45
days after the date of purchase. Philips reserves
the right to verify the purchase price of the
product and limit refunds not to exceed suggested
retail price.
To obtain the money-back guarantee service,
please go to www.PhilipsMoneyBack.com and
follow the simple 3-step process.
Delivery of refund check will occur 6–8 weeks after
receipt of returned product.
Switching the product on and o
To switch the product on or o, press the on/o
button once (Fig. 6).
Shaving
For the best results on skin comfort, pre-trim your
beard if you have not shaved for 3 days or longer.
You can use this product either wet or dry, or even in
the shower. For a wet shave, apply some water and
shaving foam or gel to your skin and rinse the
shaving heads under the tap with warm water before
following the steps below.
1 Switch on the shaver.
2 Move the shaver in circular movements over your
skin to catch hair growing in all directions (Fig. 7).
Make sure each shaving head is fully in contact
with the skin. Exert gentle pressure for a close,
comfortable shave.
Note: Do not press too hard, as this can cause skin
irritation.
Note: If you are shaving with gel or foam, rinse the
shaving unit regularly during your shave to ensure
that it continues to glide smoothly over your skin
(Fig. 8).
3 Switch o and clean the product after each use
(see 'Cleaning and maintenance').
4 Put the protective cap on the product to protect
the shaving heads during storage and travel.
Note: Make sure you rinse all foam or shaving gel o
the product.
21-Day adaptation process
- 21 Day Trial and Conversion Process. It is a fact that
your skin and beard need time to adjust to a new
grooming system.
- Use your new shaver exclusively for 3 weeks to
fully enjoy the closeness of a Philips Norelco shave.
- At rst you may not get as close a shave as you
expect, or your face may even become slightly
irritated. This is normal since your beard and skin
will need time to adjust. Invest 3 weeks and you'll
soon experience the full joy of your new shaver.
- Stick with it! If you alternate shaving methods
during the adjustment period, it may make it more
dicult to adapt to the Philips Norelco shaving
system.
- If you are still not convinced after 21 days, Philips
Norelco will refund you the full purchase price as
long as the request is received within 45 days of
purchase.
Travel lock
You can lock the shaver when you are going to travel
to prevent it from switching on accidentally.
Activating the travel lock
Press the on/o button for 3 seconds to use the travel
lock mode (Fig. 9). When you activate the travel lock,
the travel lock indicator ashes and then goes out.
Deactivating the travel lock
Press the on/o button for 3 seconds (Fig. 9). When
you deactivate the travel lock, the travel lock indicator
ashes and then goes out. Once the travel lock is
deactivated, the shaver switches on automatically.
Note: The shaver unlocks automatically when it is
connected to a power outlet.
Cleaning and maintenance
Regular cleaning guarantees better shaving results.
Never clean, remove or replace the shaving unit
while the shaver is switched on.
Do not touch shaving heads with hard objects
as this may dent or damage the precision-made
slotted shaving head.
Do not use abrasives, scourers or aggressive liquids
such as gasoline or acetone to clean the shaver.
Cleaning the shaver
Always check if the water is too hot, to prevent
burning your hands.
Clean the shaver after every shave for optimal shaving
performance.
While rinsing shaving heads, water may drip out
of the base of shaver. This is a normal occurrence.
Internal electric parts are in a waterproof
compartment so the shaver will be protected against
water damage.
1 Press the on/o button once to switch on the
product (Fig. 6). Rinse the shaving unit with cold or
lukewarm water (Fig. 8).
2 Press the on/o button to switch o the product.
Pull the shaving unit o the shaver (Fig. 10).
3 Rinse the shaving unit and hair chamber with
lukewarm water (Fig. 11).
4 Carefully shake o excess water and let the shaver
air dry.
Never dry the shaving unit with a towel or
tissue, as this may damage the shaving heads
(Fig. 12).
5 Put the shaving unit back onto the shaver (Fig. 13).
Thorough cleaning
Clean the shaving heads thoroughly once a month for
optimal performance.
1 Switch o the shaver.
2 Pull the shaving unit o the shaver (Fig. 10).
3 Rinse the shaving unit and hair chamber with
lukewarm water (Fig. 11).
4 Turn the lock counterclockwise and remove the
retaining frame. Place it aside in a safe place
(Fig. 14).
5 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a guard
(Fig. 15).
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and guards,
it may take several weeks before optimal shaving
performance is restored.
6 Remove the cutter from the shaving guard and
clean both parts under the tap (Fig. 16).
7 Put the cutter back into the guard.
8 Put the shaving heads back into the shaving unit
(Fig. 17).
9 Put the retaining frame back into the shaving unit
and turn the lock clockwise (Fig. 18).
10 Put the shaving unit back onto the shaver (Fig. 13).
Note: If you cannot attach the shaving unit onto
the shaver easily, check if you have inserted the
shaving heads properly and if the retaining frame
is locked.
Replacement
Replacing the shaving heads
For maximum shaving performance, replace the
shaving heads once a year (Fig. 19). Replace damaged
shaving heads immediately.
Always replace the shaving heads with original Philips
Norelco shaving heads (see 'Accessories').
1 Switch o the shaver.
2 Pull the shaving unit o the shaver (Fig. 10).
3 Turn the lock counterclockwise and remove the
retaining frame. Place it aside in a safe place
(Fig. 14).
4 Remove the shaving heads from the shaving unit.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads
(Fig. 20).
5 Place new shaving heads in the shaving unit
(Fig. 17).
6 Put the retaining frame back into the shaving unit
and turn the lock clockwise (Fig. 18).
7 Put the shaving unit back onto the shaver (Fig. 13).
Note: If you cannot attach the shaving unit onto
the shaver easily, check if you have inserted the
shaving heads properly and if the retaining frame
is locked.
This product has no other user-serviceable parts. For
assistance call 1-800-243-3050.
Storage
- Make sure the product is switched o. Remove the
USB power source from the power outlet and the
product before storing the product in a safe, dry
location where it will not be crushed, banged, or
subject to damage.
- Do not wrap cord around the product when
storing.
- Store cord and other accessories in a safe location
where these will not be cut or damaged.
- Do not place or store the product where it can
fall or be pulled into a tub or sink, water or other
liquid while plugged in.
Put the protective cap on the shaver to prevent
damage.
Note: Always let the shaver dry completely before
storing.
Storage in travel case
Store the shaver in the travel case supplied.
Note: Make sure the shaver is dry before you store it in
the travel case.
Accessories
Replacement parts and accessories may be
purchased at a store near you or on our website
www.philips.com/store.
The following accessory is available:
- SH30 Philips Norelco replacement shaving heads
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free 1-800-
243-3050.
Disposal
- This product contains a rechargeable lithium-ion
battery which must be disposed of properly.
- Contact your local town or city ocials for battery
disposal information. You can also call 1-800-822-
8837 or visit: www.call2recycle.org for battery
drop-o locations (Fig. 21).
- For assistance, visit our website
www.philips.com/support or call 1-800-243-
3050 toll free.
- Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused. For recycling information,
please contact your local waste management
facilities or visit: www.recycle.philips.com.
FCC Compliance Information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference,
and
2 This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receive.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Full Two-Year Warranty
Philips North America LLC warrants this new product
against defects in materials or workmanship for a
period of two years from the date of purchase, and
agrees to repair or replace any defective product
without charge.
IMPORTANT: This warranty does not cover damage
resulting from accident, misuse or abuse, lack of
reasonable care, the axing of any attachment
not provided with the product or loss of parts or
subjecting the product to any but the specied
voltage.*
The shaving heads (cutters and guards) are not
covered by the terms of this warranty because they
are subject to wear and tear.
NO RESPONSIBILITY IS ASSUMED FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
In order to obtain warranty service, simply go to
www.philips.com/support. It is suggested that for
your protection you return shipments of product by
insured mail, insurance prepaid. Damage occurring
during shipment is not covered by this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
This warranty gives you specic legal rights, and you
may also have other rights which vary from state
to state. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so
the above exclusion and limitations may not apply to
you.
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
If you are not fully satised with your product send
the product back and we’ll refund you the full
purchase price.
The product must be shipped prepaid by insured
mail, insurance prepaid, have the original sales
receipt, indicating purchase price and date of
purchase.
We cannot be responsible for lost mail.
The product must be postmarked no later than 45
days after the date of purchase. Philips reserves
the right to verify the purchase price of the
product and limit refunds not to exceed suggested
retail price.
To obtain the money-back guarantee service,
please go to www.PhilipsMoneyBack.com and
follow the simple 3-step process.
Delivery of refund check will occur 6–8 weeks after
receipt of returned product.
