Loading ...
Loading ...
Loading ...
Seagate SkyHawk AI Serial ATA Product Manual, Rev. B 22
3.4 Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
See Figure 5, Figure 5 and Figure 6 for drive mounting dimensions. Follow these important mounting precautions when mounting the
drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1 Mechanical specifications
Refer to Figure 5, Figure 5 and Figure 6 for detailed mounting configuration dimensions. See Section 3.4, “Drive mounting.”
Figure 4. Mounting configuration dimensions 10TB models
Weight: 8TB models 1.631 lb 740g
Note
These dimensions conform to the Small Form Factor Standard documented in
SFF-8301 and SFF-8323, found at www.sffcommittee.org
Note The image is for mechanical dimension reference only and may not represent the actual drive.
2X 1.750±.010
3X 3.750±.010
2
2X 1.432±.020
3X .125±.010
2X 1.625±.020
2X 3.000±.010
2
.814±.020
C
L
OF DRIVE
6X 6-32 UNC-2B
.169
.010 x 90
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLES
MAX TORQUE: 6 IN-LBF
C
L
OF CONN
3X .250±.010
BOTH SIDES
1.122±.020
1.638±.010
4.000±.010
6X 6-32 UNC-2B
.160
.010 x 90
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLES BOTH SIDES
MAX TORQUE: 6 IN-LBF
1.028 MAX
[26.10MM]
2
.138±.015
2.000
C
L
OF DRIVE
TEMPERATURE
CHECKPOINT
60
C MAX
4.000±.010
5.787 MAX
147.00 MM
Loading ...
Loading ...
Loading ...