Loading ...
Loading ...
Loading ...
Assembly
ASSEMBLY INSTRUCTIONS
1. Carefully turn the Main Body upside-down on a scratch-free and stable
surface. Be careful to prevent damage to the cosmetic finish or your floor
surfacing.
2. Align the 2 holes in the foot with the 2 holes in the base of the appliance.
3. Place screws in the centre of the holes and screw in with a screwdriver.
4. Repeat for other foot.
5. Turn the appliance the right way up.
WARNING: Heater must not be used without the feet, castors, wheels
fitted.
This appliance has been supplied with ‘1 way screws’ for permanent
installation of the feet. This is a safety requirement for the New Zealand and
Australian market.
Loading ...
Loading ...
Loading ...