Loading ...
Loading ...
Loading ...
1744/1743
Users Manual
28
egb015.bmp
Figure 12. Selecting Voltage Input Ranges During Job Processing
Note
For P-P logging, the P-P voltage must be entered as the nominal
voltage (e.g. 400 V for 230 V systems).
Signal Sampling
Input signals (up to three voltages and four currents) are filtered with an anti-
aliasing filter, and digitized with a 16-bit A/D converter. The sampling rate is
10.24 kHz. All parameters are calculated from this data.
Resolution Accuracy
Resolution and accuracy depend on the logging parameter. For details, see
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...