Loading ...
ii
Important Safety Information
Improper handling can cause serious damage to the EdgeStar ice maker and / or injury to the user.
This ice maker is designed for domestic use only. All units besides the IB250SSOD should only be
used indoors. Do not use the unit for industrial or commercial use. Any other use or incorrect
installation may invalidate the warranty. Please review the rating label located inside the unit for
electrical and other technical data related to this unit. The unit must be used in a properly grounded
wall outlet. Please read and follow the safety information listed below to reduce the risk of fire, electric
shock, or injury. Installation should only be done by a licensed plumber.
Electrical Safety
• Do not exceed the power outlet ratings.
• Plug into a grounded 3-prong outlet. Do not remove the grounding prong, use an adapter, or use an
extension cord.
• It is recommended that a separate circuit, serving only your ice maker, be provided. Use outlets that
cannot be turned off by a switch or pull chain.
• Do not plug or unplug the unit when your hands are wet.
• Never unplug the ice maker by pulling on the power cord. Always grip the plug firmly and pull straight
out from the outlet.
• Before proceeding with cleaning, maintenance, or service, make sure the unit’s power line is
disconnected and the water line is shut off. Failure to do so can result in electrical shock or death.
• Unplug the unit if it is not going to be used for an extended period of time.
• Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose
socket.
• Do not bypass, cut, or remove the grounding plug.
• All electrical and water connections for the unit must be installed in accordance with state and local
codes. A standard electrical supply (115V, 60 Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
• Do not kink or pinch the power supply cord between the ice maker and cabinet.
• The fuse (or circuit breaker) size should be 15 amps.
• Do not use extension cords or power strips with this unit. You may need to contact your electrician if it
is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the power
cord’s length or share the outlet with other appliances.
• Do not start or stop the unit by switching the circuit’s power on and off.
• If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.
• Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and
contact customer service.
• Do not remove any part of the casing unless instructed to do so by an authorized technician.
• You should never attempt to repair the unit yourself. Contact a customer service specialist for service
options if the unit needs service.
Important: Be sure the unit is standing upright for 24 hours before plugging it in.
Loading ...
Loading ...
Loading ...