Loading ...
Loading ...
Loading ...
15
Pressing the Laser Button
Note: Laser light can cause severe eye damage. Never look directly into the laser beam. Do not point the
laser beam at other people or animals, either directly or through reflective surfaces.
The laser feature on your saw is powered by two LR44 1.5V button batteries (installed).
The Laser feature clearly shows you an extended cut-line, even over debris on the work
piece.
Turn it on with the laser light ON/Off switch right before cutting.
Turn it off immediately after use to conserve battery and laser life.
Application
This tool is primarily intended for the sawing, longitudinally and transversely, of solid wood, chipboard,
plywood, soft metal, tile and stone held in a fixed position please note that the blade pre-installed in the
saw as supplied is intended for use with wood only. Any other use or modification to the device shall be
considered as improper use and could give rise to considerable dangers.
Installing Parallel Guide
NOTE: The parallel guide enables exact cuts along a workpiece
edge and cutting strips of the same dimension.
Release the lock screw for guide fence on the base plate and set the
guide fence in the guide fence slot.
Set a desired width and retighten the lock screw for the guide fence.
TEMPERATURE CONTROL /OVERLOAD PROTECTION
When the temperature of battery is too high and the machine switches off automatically.
• Switch the power tool off.
• Allow the battery to cool down before continuing to work.
When the power tool is blocked and switches off automatically.
• Remove the power tool from the workpiece.
• As soon as the blockage is corrected, the power tool will continue to work at the set stroke rate.
Fig.7
Fig.6
Loading ...
Loading ...
Loading ...