Loading ...
Loading ...
Loading ...
1. Give an alarm
Other functions
Display Explanation Settlement
The top lid is opened
when preset is started
Close the top lid and clear up the
alarm.
After draining 5
minutes, it still does
not reach to water
level
Open top lid, according to before
troubleshooting and settlement to
settle it, then close the top lid and
clear up the alarm.
The top lid is open
when spinning.
Close the top lid and clear up the
alarm.
Spin does not balance
Open the top lid ,make the laundries
place equally, then close it and clear
up the alarm
After inlet 50 minutes
still not reach to
setting water level
Open top lid, according to before
troubleshooting and settlement to
settle it. Then close the tip lid and
clear up the alarm
The water level is
more than overflowing
water level.
Drain the water until the water level
reach the
The input and output
of the memory is
abnormal.
Close the top lid and clear up the
alarm.
Water level sensor is
wrong.
Cut the power supply and call the
technicians.
It does not inlet · No water supply
· Tap is not open
· Inlet hose gets blocked
Restart when water supply
is resumed
Open the tap
Clean the filter according
to before "clean inlet gate"
Spin stops and
begins to inlet
during spin
program
Laundries is too much or too
little or the machine is not
placed stably
The machine is adjusting
automatically
Press the program
button to
select SPIN, but it
does not spin.
· Do not close the top lid
when
drain is finished
· Open up the top lid when
start drain
· Close the top lid
· Close the top lid
Notes: If there is still a fault after the above checks, please pull out the plug
and contact the after-sales service center right away. It is dangerous to
repair this product by yourself.
The spin is
intermittent when
spin starts
Balance the laundries to
reach to the best spin effect
Normal
First time to use,
some water flows
from the drain hose
The remaining water when
the factory make test
Normal
20 21
Loading ...
Loading ...
Loading ...