Loading ...
Loading ...
Loading ...
06
Correct use of the device:
Do not face lens into eyes as injury to the eyes can be caused by the strong projector light.
Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic
devices arising from normal heat dissipation failure of the device.
Do not wipe the lens directly with cleaning tools including paper and cloth etc. in order to
avoid damage to lens; please clean up the dust on the lens surface through clean air blowing.
Do not wash the device with chemicals, detergents or any liquid in order to avoid corrosion of
circuit board by rainwater, moisture and mineral-containing liquids.
Keep the device and its components and accessories out of reach of children.
Ensure that the device is used in a dry and ventilated environment.
Do not store the device in overheated or overcooled places because extreme temperatures
will shorten the lifespan of electronic devices. Permissible storage and usage environments
should have a temperature range of 0°C to 40°C.
Do not put the device into any heating equipment (such as a dryer or microwave oven) for
drying.
Do not extrude the device firmly or place barriers on it or its back to avoid damage to the
device.
Do not throw, strike, or sharply shake the device to avoid damage to the internal circuit board.
Do not try to disassemble and assemble the device yourself. Please contact XGIMI after-sales
service for any issues.
Do not repair any product on your own. In the case of normal operation failure of the device or
any component, consult XGIMI after-sales service promptly or return it to the factory for
repair.
Operations in the 5.15-5.35 GHz band are restricted to indoor usage only.
When installing and operating the device, the distance between radiator and body should be
at least 20cm.
As with any bright sources, do not stare directly into the beam, RG2 IEC 62471-5:2015
Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as
defined in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019.
Be cautious when using earphones with the device as there may be excessive sound pressure
from earphones and headphones that can cause hearing loss.
Wi-Fi (5 GHz band) warning
High-gain directional antennas apply only to the fixed peer-to-peer networking.
Do not place the device near radar systems.
VCSEL Laser
Max output of laser radiation: Max. 60 µJ
Pulse duration: 15 Hz
Emied wavelength: 850 nm
Name and publication date of the standard: IEC 60825-1: 2014
Loading ...
Loading ...
Loading ...