Loading ...
Loading ...
Loading ...
40
Function settings
Night setback
P
Function description
This control starts heating operation when the control object group is stopped and the room
temperature drops below the preset lower limit temperature. Also, this control starts cooling operation
when the control object group is stopped and the room temperature rises above the preset upper limit
temperature.
The Night setback function is not available if the operation and the temperature setting are performed
from the remote controller.
If the room temperature is measured by the air-conditioner’s suction temperature sensor, the accurate
temperature may not be obtained when the air-conditioner is inactive or when the air is not clean. In
this case, switch the sensor to a remote sensor (PAC-SE40TSA/PAC-SE41TS-E) or a remote control
sensor.
Button operation
1
Select “Night setback” from the Timer menu, and
press the
SELECT
button.
2
The current settings will appear.
Press the
SELECT
button to go to the setting screen.
Loading ...
Loading ...
Loading ...