Loading ...
Loading ...
Loading ...
23
Main menu Setting items Setting details
Page
Energy
saving
Energy
saving
Schedule Set the start/stop times to operate the units in the
energy-save mode for each day of the week, and set the
energy-saving rate.
Up to four energy-save operation patterns can be set for
each day.
Time can be set in 5-minute increments.
Energy-saving rate can be set to a value from 0% and 50 to
90% in 10% increments.
*
Clock setting is required.
51
Initial
setting
Basic
setting
Clock Use to set the current time. 54
Daylight
saving
time
Sets the daylight saving time. 56
Display
setting
Main
display
Use to switch between "Full" and "Basic" modes for the
Status display and the Main display.
The default setting is “Full.”
58
Brightness
Use to adjust screen brightness. 61
Language
selection
Use to select the desired language. 62
Design Use to change the color of the Status display and Main
display.
64
Touch
panel
Touch
panel
calibration
Sets the calibration settings for the touch panel. 66
Touch
panel
cleaning
Temporarily makes the touch panel unresponsive to
touch to allow for cleaning.
68
Service Initialize remote
controller
Use to initialize the remote controller to the factory
shipment status.
70
Remote controller
information
Use to display the remote controller model name,
software version, and serial number.
72
Maintenance
Error information Use to check error information when an error occurs.
Error code, error source, refrigerant address, unit model,
manufacturing number, contact information (dealer's phone
number) can be displayed.
*
The unit model, manufacturing number, and contact
information need to be registered in advance to be
displayed.
74
Filter information Use to check the filter status.
The filter sign can be reset.
78
Loading ...
Loading ...
Loading ...