Loading ...
Loading ...
Loading ...
DS-K1107A Series Card Reader • User Manual
5
Description of DIP Switch Description of Cable
Color
Description
Orange
Red LED Control (available for Wiegand Protocol)
White
Wiegand W1 (available for Wiegand Protocol)
Green
Wiegand W0 (available for Wiegand Protocol)
Blue
RS-485-
Yellow
RS-485+
Red
PWR (+12 VDC)
Black
GND
Gray
TAMPER (available for Wiegand Protocol)
Purple
Beep Control (available for Wiegand Protocol)
Brown
Green LED Control (available for Wiegand Protocol)
Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to establish the communication between
them.
Steps for RS-485 communication mode:
Set the DIP switch of No. 6 as 0.
Set the DIP switch of No. 1 ~ 4 for RS-485 address. For details, please refer to 2.1
Introduction for DIP Switch.
Wire the cable between controller and card reader as shown below.
Yellow
Blue
Black
Red
Black
Red
Green
White
Purple
Orange
Brown
Controller
Card Reader
Card Reader
Card Reader
Green
Wiring for RS-485 Communication Mode
Loading ...
Loading ...
Loading ...