Loading ...
Loading ...
Loading ...
Fig. 14
Drain cap loose may cause water leakage and cause floor damage.
Please make sure it is tighten enough before long term using.
Unplug the water dispenser before cleaning and wiping up spilled water on unit.
Be careful on the hot water coming out
Never disassemble this machine by yourself to avoid risk of damaging machine.
when tapping hot water and drain water from drain hole.
Scald Hazard
Electrical Shock Hazard
Water Leakage
WARNING
CAUTION
Sanitizing
To remove mineral deposits
CAUTION
WARNING
Scald Hazard
Dispenser heats water to a temperature of 194°F (90°C).
Water temperatures above 125°F (52°C) can cause severe burns or scalding.
Children, the disabled and the elderly are at highest risk of being scalded.
Children should be supervised by an adult when using this product.
Mix 1 gallon of water with half pound of citric acid crystals, inject
into the machine and make sure the water can flow out from the hot water spout
when the hot water button be activated. Switch on the power and heat water,
30 minutes later, drain off the liquid and clean it with water two or three times.
Generally this should be done every six months.
11
The machine should be disinfected with
disinfectant separately bought from drugstore or
marketplace according to the instruction manual
of the disinfectant and then clean it with water
(see cleaning and draining instructions).
Generally this should be done every three
months.
After plug-in each time, if the water not fill in the cold tank fully, the water shortage
indicator will blinking and pump is working.
If the water level of the cold tank still fails to reach the limit within 5 minutes, the
water shortage indicator will continue blinking, but the water pump will stop working.
In any time, once the cabinet door is opened, the pump should not working.
Loading ...
Loading ...
Loading ...