Loading ...
Loading ...
Loading ...
Quick Start Guide of Blazer Express
26
Pre-Record: Record video from periods preceding detected events. The default value is 5 seconds and
not editable.
Post-Record: Record video from periods following detected events. The default value is 10 seconds and
not editable.
Video Files Storage: Select the storage mode for the recorded videos.
Overwrite: Overwrite the oldest videos when disk or allocated quota is full.
Period: When this option is selected, Blazer Express will automatically delete the oldest videos after the
specified retention period. This method allows you to define the longest time period to keep the videos as
desired and the actual retention period for the videos depends on the allocated quota.
Enable ANR: Turn the automatic network replenishment on to temporarily store the video in the camera
when network fails and transport the video to Blazer Express when network recovers.
4. Click Add to add the rule and back to the recording list page. You can also click Add and Continue to save
the settings and continue to add other recording settings.
Remote Playback
Purpose:
After configuring the recording settings for the camera via the Web Client, the video files can be searched and
played back remotely via Control Client.
Note: Here we only introduce the playback of continuous video files. For other operations about playback, please
refer to the User Manual of Blazer Express Control Client.
Click Remote Playback on the control panel to enter the Remote Playback page.
Searching Video Files for Playback
Steps:
1. Enter the Remote Playback page.
2. Click-and-drag the camera, or area to the display window, or double-click the camera, or area to start the
playback.
Playing Video Files
The timeline indicates the time duration for the video files, and the video files of different types are color coded.
You can hover cursor over the timeline to take a quick view of the video thumbnail of that time. Drag the timeline
or click the thumbnail to play back the video of the specific time.
You can click or to zoom in or zoom out the timeline bar. You can also use the mouse wheel to zoom in
or zoom out on the timeline.
You can drag the timeline bar to go to the previous or the next time period.
Move the mouse to the playback window and click and set the locking duration to protect the video file from
being overwritten when the HDD is full and it cannot be deleted as well.
Event Configuration
Purpose:
In Blazer Express Web Client, you can configure event detection settings and check the event logs via Control
Client.
Click the Event & Alarm and select Event to enter the Event Configuration page.
Configuring Motion Detection Event
Note: The camera exception types vary according to the connected device. Here we take the introduction of motion
detection settings as an example. For the settings of other camera exception types (e.g., video loss, video
tampering), please refer to the User Manual of the connected devices. For the settings of other event types (e.g.,
alarm input, device exception), please refer to the User Manual of Blazer Express Web Client.
Loading ...
Loading ...