Loading ...
Loading ...
Loading ...
CONVERSIO
N FROM NATURAL GAS (NG) TO
PROPANE
(LPG)
Every range is provided with a set of injectors for the various types of gas.
Select the injectors to be replaced according to the “INJECTORS TABLE”.
The nozzle diameters, expressed in hundredths of a millimeter, are marked on the body of each
injector.
Any conversion required must be performed by your dealer or a qualified licensed plumber or gas
service company.
Please provide the service person with this manual before work is started on the range.
(Gas
conversions are the
responsibility
of
the dealer or end user.)
SETTING
THE PRESSURE REGULATOR
ST
EP 1
S
T
EP 2 ST
EP 3
Step 1: Open the regulator cover by turning the cover in a counter-clockwise direction.
Step 2: See the pressure screw installed in the cover. This is the Natural Gas position.
Step 3: Carefully unscrew the pressure screw and remove it along with the spring below.
Invert the position of the pressure screw and spring Reinstall the pressure screw as
showing in the image above.
Step 4: Re-Install the regulator cover by screwing into place in a clockwise direction.
Ensure the cover securely closed before installing the regulator and connecting to the
gas supply. DO NOT OVERTIGHTEN
23
P
Save the orifices removed from the appliance for future use.
GAS INLET
Pressure Regulator
Gas Shut-off Valve
Pressure regulator can withstand a maximum input pressure of 0.5 psi (3.5 kPa), and is set at 5"
WC outlet pressure when used on NATURAL GAS and 10" WC outlet pressure when used on
LIQUID PROPANE.
Step 5: Before operating the range after the gas conversion, always check for leaks with a
soapy water solution or other acceptable method in at gas connections installed between
the gas inlet pipe of the range, gas regulator, and the manual shut-off valve.
Use soapy solutions to check for leakage on all joints.
Loading ...
Loading ...
Loading ...