Loading ...
Loading ...
Loading ...
8 49-3000368 Rev 0
Using the washer
USING THE WASHER
A
B
C
Power
Press to “wake up” the display. If the display is active, press to put the washer into standby “OFF” mode.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
Start and Pause (Add Garment)
Press to start a wash cycle. If the washer is running, pressing it once will pause the washer and unlock the door,
allowing Add Garment (should be done early in the wash cycle) or removal of a garment. It will take a few
seconds for the door to unlock after pressing Start/Pause. After adding or removing garments, press again to
restart the wash cycle.
NOTE: If washer is paused and cycle is not restarted within 15 minutes, the current wash cycle will be cancelled.
NOTE: The washer performs automatic system checks after pressing the Start pad. Water will flow in 45
seconds or less. You may hear the door lock and unlock and the pump activate before water flows.
Wash Cycles
The cycles are optimized for specific types of loads. The chart below will help you match the items to be
laundered with the best cycle settings. For optimal performance, select the cycle that most closely matches the
items in your load. Delay Start/Remote Start is available on all cycles.
Cycle Recommended Items
Normal Cycle for normal, regular, or typical use for washing up to a full load of normally soiled cotton clothing.
Delicates Lingerie and special care fabrics with light soil.
Towels Towels, sheets, pillowcases and dish rags.
Bulky Bedding Comforters, large coats, bed spreads, mattress covers, sleeping bags, and similar large bulky
items.
Sanitize+
Allergen*
Heavily soiled colorfast items with the need for sanitization.
Sanitize With
Oxi*
Heavily soiled colorfast items with the need for sanitization.
Active Wear Medium to lightly soiled athletic wear items of technical or synthetic fabrics.
Quick Wash Small loads of lightly soiled items that are needed in a hurry.
Whites Whites and household linens.
Rinse and Spin For items that need only to be rinsed and not washed. Rinse & Spin, or Drain & Spin (Extra
Rinse deselected). A spin is always performed unless you select No Spin.
Cold Wash Cycle for normal, regular, or typical use for washing up to a full load of normally soiled cotton
clothing using only cold water while delivering equivalent performance to Normal Warm wash.
Downloaded Use the SmartHQ App to download a specialty cycle for your washer.
Power Clean For heavily soiled items which require extra cleaning power.
Heavy Duty* For washing heavily soiled, sturdy colorfast items using extended wash motions and rinses to
deliver extra cleaning.
Jeans Jeans with medium to light soil.
Swim Wear Swim wear with medium to light soil.
Self Clean Cleaning the basket of residue and odor. No clothes are to be washed using this cycle.
*Some cycles and options may not be available on some models.
NOTES:
The SANITIZE + Allergen cycle’s water temperatures CANNOT be changed. This cycle utilizes elevated water
temperature and a longer wash cycle to kill dust mites and reduce 99% of common bacteria from fabrics. A pump
purge and extended rinse is incorporated for the purpose of removing contaminants and allergens, such as pet dander.
The SANITIZE With Oxi cycle’s water temperatures CANNOT be changed. This cycle, when using an Oxi additive
along with your detergent, is designed to remove 99% of bacteria found in home laundry. Measure the detergent and
the Oxi products carefully. Using the amounts appropriate for a large heavily soiled load in a front load washer, follow
the detergent and the Oxi product label instructions. The washer hot water supply connection must provide a minimum
of 120°F to ensure the effectiveness of this cycle.
Only the SANITIZE + Allergen and SANITIZE With Oxi cycles have been designed to meet the requirements of
sanitizing effectiveness.
Loading ...
Loading ...
Loading ...