Loading ...
Loading ...
Loading ...
8. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
9. Click Apply.
Region Entrance Detecon
Region entrance detecon funcon detects people, vehicles or other objects which enter a pre-
dened virtual region from the outside place, and some certain acons can be taken when the
alarm is triggered.
Steps
1. Go to Conguraon → Event → Smart Event → Region Entrance .
Figure 6-25 Region Entrance Detecon
2. Set Camera.
3. Select VCA Mode.
By NVR
The event will be analyzed by NVR. The device can analyze videos that contain human and
vehicle. Only the target of selected type (human or vehicle) will trigger alarms, which can
reduce false alarms that are caused by other objects.
By Camera
The event will be analyzed by camera.
4. Turn on Enable.
5. Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon.
6. Set the detecon rules and detecon areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Adjust Sensivity. Sensivity: Range [0-100]. The higher the value is, the more easily the
detecon alarm can be triggered.
Network Video Recorder User Manual
59
Loading ...
Loading ...
Loading ...