Loading ...
Loading ...
Loading ...
Figure 6-4 Channel-Zero
4. Turn on Enable.
5. Congure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate
require higher bandwidth requirement.
6. Click Apply.
6.1.3 User
Refer to User for details.
6.2 Network Conguraon
6.2.1 TCP/IP
TCP/IP must be properly congured before you operate video recorder over network.
Steps
1. Go to Conguraon → Network → General → TCP/IP .
2. Congure network parameters.
Working Mode
●
Mul-address Mode: The parameters of the two NIC cards can be congured
independently. You can select LAN1 or LAN2 in the NIC type eld for parameter sengs.
You can select one NIC card as default route. And then the system is connecng with the
extranet and the data will be forwarded through the default route.
●
Net-fault Tolerance Mode: The two NIC cards use the same IP address, and you can select
the Main NIC to LAN1 or LAN2. By this way, in case of one NIC card failure, the video
recorder will automacally enable the other standby NIC card so as to ensure the normal
running of the whole system.
●
Load Balance Mode: By using the same IP address and two NIC cards share the load of the
total bandwidth, which enables the system to provide two Gigabit network capacity
Network Video Recorder User Manual
37
Loading ...
Loading ...
Loading ...