Loading ...
Loading ...
Loading ...
Control Panel
4
Filling Instructions
Control Panel Display
POWERPOWER
SLEEP TIMER UV CONSTANT
HUMIDITY
POWER
MAX-MIN
CONSTANT
HUMIDITY
UV
TIMER
SLEEP
After turning on the power, touch to turn on the screen, and touch again to turn it
off.
The product is divided into low/medium/high mist volume and the mist volume
can be adjusted. Touch the mist button each time for cycle adjustment.
Touch the button for the first time to enter into the constant humidity function.
The default humidity is 40%; touch this button again to adjust the presethumidity,
the maximum is 90%. When adjusting, the screen shows the setting humidity,
touch again to turn off the constant humidity function. (humidity value is 5%
increment)
Put the machine on the stable surface, take out the protective bag of the pump and fill the tap
water or distilled water into the water tank (the power plug must be unplugged when filling the
water).
Put the water pump into the base of the water tank, put the main body on the water tank, and
then plug into the socket. Before powering on, please ensure that the working voltage of the
machine must match the operating voltage.
Connect the power supply with a buzzer sound, indicating that the machine is ready to work
at this time.
Before moving the machine, please turn off the power switch and unplug the power plug,
moves the whole machine together; please do not move the machine under the working
state, so as not to cause normal operation or failure.
NOTE: Please fill clean tap water or distilled water below 40℃.
Under the working condition, touch the UV button to turn on the UV sterilization
function and touch again to turn it off. This feature is off when the product is
turned on.
Touch the sleep button to turn off the screen. Touch again to light up the screen.
1. Lift the main body and take out
the protective bag of the pump.
2. Put the water pump in the bottom
of the water tank and place in a
balanced position.
3. Open the top cover of the main
body and fill water, pay attention
not to exceed the 8L maximum
water level.
4. Plug in the power cord and turn it on.
This product has the appointment timer shutdown function. Touch this button to
set the shutdown time. Each time to touch the button, the screen will display the
setting time. The product can continue to work for 12 hours and then automatically
shut down. The automatic shutdown time is set in units of one hour, and the user
can select settings from thirteen levels.
Loading ...
Loading ...
Loading ...