Loading ...
Loading ...
Loading ...
- 16 -
�
�
�
�
�
�
�
�
�
�
�
�
Fig.7: Place the bottom ue G on top of
the frame. Then pull out the top ue F
to the bracket and fasten it using the 2
screws E.
Fig.8: Remove the aluminum panels
by pulling the lever 1 out and pushing
downwards 2.
Fig.9: The lters C must be applied to the
suction unit inside the hood, centering
them inside of it and turning them 90° until
they snap into place.
Fig.10: Put the aluminum panels back in
place (Fig.8).
Loading ...
Loading ...
Loading ...