XO XOB42SC User Manual

Loading ...

- 10 -

POWER SUPPLY:

IMPORTANT – (Please read carefully)

WARNING:

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

Remove house fuse or open circuit breaker before beginning installation. Do not use an

extension cord or adapter plug with this appliance. Follow National electrical codes or

prevailing local codes and ordinances.

Electrical supply:

These vent hoods must be supplied with 120V, 60Hz, and connected to an individual,

properly grounded branch circuit, and protected by a 15 or 20 amp circuit breaker or

time delay fuse.

• Wiringmustbe2wirewithground.

• Iftheelectricalsupplydoesnotmeettheaboverequirements,callalicensedelectrician

before proceeding.

•Routehousewiringasclosetotheinstallationlocationaspossible,intheceilingor

back wall. Refer to Wiring Locations on page 11.

•Connectthehoodwiringtothehousewiringinaccordancewithlocalcodes.

Grounding instructions:

The grounding conductor must be connected to a grounded metal, permanent wiring

system, or an equipment-grounding terminal or lead on the hood.

WARNING: The improper connection of the equipment-grounding conductor

can result in a risk of electric shock. Check with a qualied electrician or service

representative if you are in doubt whether the appliance is properly grounded.

Loading ...

XOB42SC B Series 42 Inch Wall Mount Convertible Hood with 600 CFM, LED Lights, Delay Off, UL Certification, Aluminum Mesh Filters, Code Compliance Controls in Stainless Steel