Loading ...
Loading ...
Loading ...
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-14 Fix the Wall Mount
3. Loosen the set screw.
4. Refer to step 1 of 2.2.3 Ceiling Mounting Without
Junction Box to dissemble the camera.
5. Use two M4 × 10 screws to fix the base onto the
wall mount.
Figure 2-15 Fix the Base onto the Wall Mount
6. Repeat steps 6 to 9 of 2.2.3 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-16 Finish the Installation
2.3 Installation of Type IV Camera
2.3.6 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the installation
location.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. Loosen the tightening screw, and pull out the clip
plate to dissemble the camera.
Figure 2-17 Dissemble the Camera
4. Install the camera to ceiling.
Loading ...
Loading ...
Loading ...