DS-2CD2723G1-IZS User Manual

Loading ...

FTP/NAS/Memory Card Uploading

If you have enabled and congured the FTP/NAS/memory card uploading, the device sends the

alarm informaon to the FTP server, network aached storage and memory card when an alarm is

triggered.

Refer to Set FTP to set the FTP server.

Refer to Set NAS for NAS conguraon.

Refer to Set Memory Card for memory card storage conguraon.

Send Email

Check Send Email, and the device sends an email to the designated addresses with alarm

informaon when an alarm event is detected.

For email sengs, refer to Set Email .

Set Email

When the email is congured and Send Email is enabled as a linkage method, the device sends an

email nocaon to all designated receivers if an alarm event is detected.

Before You Start

Set the DNS server before using the Email funcon. Go to Conguraon → Network → Basic

Sengs → TCP/IP for DNS sengs.

Steps

Go to email sengs page: Conguraon → Network → Advanced Sengs → Email .

Set email parameters.

1) Input the sender's email informaon, including the Sender's Address, SMTP Server, and

SMTP Port.

2) Oponal: If your email server requires authencaon, check Authencaon and input your

user name and password to log in to the server.

3) Set the E-mail Encrypon.

●

When you select SSL or TLS, and disable STARTTLS, emails are sent aer encrypted by SSL or

TLS. The SMTP port should be set as 465.

●

When you select SSL or TLS and Enable STARTTLS, emails are sent aer encrypted by

STARTTLS, and the SMTP port should be set as 25.

Note

If you want to use STARTTLS, make sure that the protocol is supported by your email server.

If you check the Enable STARTTLS while the protocol is not supported by your email sever,

your email is sent with no encrypon.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2723G1-IZS 2 MP Outdoor WDR Motorized Varifocal Dome Network Camera