DS-2CD2723G1-IZS User Manual

Loading ...

2.12.2 Auto-Tracking

Steps

Go to Conguraon → EPTZ .

Check Enable EPTZ.

The default Stream Type is Third Stream and cannot be congured.

Select Auto-tracking in Applicaon.

Click Detecon Area to start drawing.

Click on the live video to specify the four vertexes of the detecon area, and right click to

complete drawing.

Set rules.

Detecon Target

Human and vehicle are available. If the detecon target is not selected, all the detected

targets will be tracked, including the human and vehicle.

Note

Only certain camera models support this funcon.

Sensivity

It stands for the percentage of the body part of an acceptable target that is tracked.

Sensivity = 100 - S1/ST × 100. S1 stands for the target body part that enters the pre-dened

area. ST stands for the complete target body. The higher the value of sensivity is, the more

easily the target can be tracked.

Click Save.

2.13 Image Stching

You can switch the video output mode for the camera according to your actual demand.

Steps

Note

●

The funcon is only supported by certain device models.

●

The actual video output mode varies according to dierent models. The actual model prevails.

Go to Conguraon → System → System Sengs → Image Stching .

Select the desired video output mode.

Panorama +

ePTZ

One stched panoramic image (8 MP) and mulple channels ePTZ images.

Channel 01 is the 8 MP panoramic image, and channel 02 and the subsequent

channels are ePTZ images. You can set the number of the channels for the

ePTZ image. Ten channels are available. For example, if you set the number of

Network Camera User Manual

Loading ...

Hikvision DS-2CD2723G1-IZS 2 MP Outdoor WDR Motorized Varifocal Dome Network Camera