BC500
Universal Mains-Power Adapter
Instruction Sheet
Introduction
The BC500 is a universal mains-power adapter (the Adapter or Product)
for measurement, control, and laboratory equipment. The Adapter is
intended for operating and charging the Fluke BT500-Series Battery
Testers. The Adapter is based on the switched-mode concept for high
efciency and low stand-by power consumption, and complies with
level-VI requirements. It operates in a wide range of input voltages from
100 Vac up to 240 Vac nominal.
A mains cord is included to make the Adapter suitable for most types of
mains outlet.
PN 4862400
January 2017
© 2017 Fluke Corporation. All rights reserved. Product
specications are subject to change without notice.
Symbols
International electrical symbols used on the Product and in this document
are explained below.
Symbol
Description
WARNING - RISK OF DANGER. Consult user documentation.
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
DC (Direct Current)
Double Insulated
Conforms to European Union directives.
VI
Energy Efciency Level VI
This product complies with the WEEE Directive marking
requirements. The afxed label indicates that you must not discard
this electrical/electronic product in domestic household waste.
Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as category 9
“Monitoring and Control Instrumentation” product. Do not dispose of
this product as unsorted municipal waste.
Conforms to relevant South Korean EMC Standards.
Certied by ETL Intertek to North American safety standards.
Conforms to relevant Australian Safety and EMC standards.
Conforms to relevant Safety standards in Japan
10 year Environment Friendly Use Period (EFUP) under China
Regulation - Administrative Measure on the Control of Pollution
Caused by Electronic Information Products. This is the period of time
before any of the identied hazardous substances are likely to leak
out, causing possible harm to health and the environment.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship
for one year from the date of purchase. This warranty does not cover
fuses, disposable batteries, or damage from accident, neglect, misuse,
alteration, contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other warranty on
Fluke’s behalf. To obtain service during the warranty period, contact your
nearest Fluke authorized service center to obtain return authorization
information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
11/99
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
