Loading ...
Loading ...
Loading ...
en-us Basic Operation
20
12.2 Switching on the appliance
▶ Touch
with a short 1 second touch.
The cycle last selected and the option last selected will
be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3 Setting a cycle
To adjust the wash cycle to the soiling level of the
dishware, select a suitable program.
▶ Press the right cycle button.
a The cycle is set and the cycle button flashes.
a The remaining run time of the cycle appears on the
display.
12.4 Setting options
You can set options to complete the chosen wash
program.
Note:The available options depend on which program is
selected.
▶ Press the button for the relevant option.
a The option is set and the option button flashes.
12.5 Setting the time delay
You can delay the start of the wash cycle via the
HomeConnect® app.
▶ Open the HomeConnect® app and select the
appliance.
In the settings, you can use the time delay function to
delay the start of the wash cycle.
12.6 Starting the wash cycle
▶ Press
.
a The wash cycle has ended when the display shows
"00h:00m".
Notes
¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡ You can only change a cycle in progress if you can
cancel it first.
→
"Terminating the wash cycle", Page20
¡ To save energy, the appliance switches off
automatically 10minutes after the end of the wash
cycle. If you open the appliance door immediately after
the wash cycle has ended, the appliance will switch off
after 4 seconds.
12.7 Interrupting the wash cycle
1. Press On/Off.
The program is saved and the appliance switches off.
2. Press On/Off.
3. Press
to resume the wash cycle.
12.8 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
▶ Press
for approx. 4seconds.
a All displays light up.
a As soon as the displays are off, the display shows
"00h:01m" and the residual water is pumped out.
a The cycle is cancelled and ends after approx. 1minute.
12.9 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
▶ Do not fully open the door until water noises have
stopped and steam has subsided.
1. Please note the information on Preventing Material
Damage →
Page6
.
2. Press On/Off.
Loading ...
Loading ...
Loading ...