Loading ...
Loading ...
Loading ...
21
• IMPORTANT: For models VC60D and SWC1966 with non-Twin Wine Conditioning System, the
temperature set for the LOWER temperature zone must always be just as high as or higher than
that in the UPPER temperature zone.
• The temperature that you desire to set will increase 1ºC or 1ºF if you touch the UP key once, on
the contrary the temperature will decrease 1ºC or 1ºF if you touch the DOWN key once. The display
flashes while you make the setting.
• After the temperature has been set, the display shows the current inner temperature of the
particular temperature zone.
• To view the set temperature at any time, touch the UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds. Then the display shows the current inner
temperature again.
Settings Mode
Certain settings on the wine cabinet can only be selected in settings mode. In settings mode only the
UP and DOWN keys of lower/right zone are valid for dual zone and three zone LED display units.
ºF/ºC Selection
▪ Lightly touch and hold the UP key for 5 seconds.
▪ Use the UP and DOWN keys to select the temperature display setting in Fahrenheit or Celsius
degree.
▪ Touch the POWER key to confirm your selection.
▪ Touch and hold the UP key for 5 seconds to leave settings mode. Otherwise the appliance exits
settings mode automatically after approximately one minute.
Display Brightness
▪ Lightly touch and hold the UP key for 5 seconds and then touch the POWER key once.
▪ Use the UP and DOWN keys to select the brightness of the display. The factory default setting is d1.
d1: dimmest setting
d2: medium setting
d3: brightest setting
▪ Touch the POWER key to confirm your selection.
▪ Touch and hold the UP key for 5 seconds to leave settings mode. Otherwise the appliance exits
settings mode automatically after approximately one minute.
Interior Lighting Brightness
▪ Lightly touch and hold the UP key for 5 seconds and then touch the POWER key twice.
▪ Use the UP and DOWN keys to select the brightness of the interior lighting. The factory default
setting is L3.
L1: dimmest setting
L2: medium setting
L3: brightest setting
▪ Touch the POWER key to confirm your selection.
▪ Touch and hold the UP key for 5 seconds to leave settings mode. Otherwise the appliance exits
settings mode automatically after approximately one minute.
Fan Mode
▪ Lightly touch and hold the UP key for 5 seconds and then touch the POWER key three times.
▪ Use the UP and DOWN keys to select the fan mode. The factory default setting is F0.
F0: Silent mode - Energy saving mode
F1: Dynamic Cooling mode - half time
F2: Dynamic Cooling mode - full time
▪ Touch the POWER key to confirm your selection.
Loading ...
Loading ...
Loading ...