Loading ...
Loading ...
Loading ...
16
Model SWC1875B
1. Remove the right bottom hinge (1)
by unscrewing the four screws (2).
Be careful to hold the lower glass
door (3) firmly after removing the
screws. And then gently pull down
to remove the lower glass door from
the middle hinge and place it on a
padded surface to avoid the risk of
damage. (Fig. 1)
2. Unscrew and transfer the door
adapter (7) and (10) to the
designated opposite position of
lower glass door. At the same time
unscrew and transfer hinge pin (5)
of the left bottom hinge (4) included
in the fittings. (Figs. 2 & 3)
3. Remove the door adapter (16) by
unscrewing the two lock screws (15). Be careful to hold the upper glass door firmly after removing
the screws. And then gently pull down to remove the upper glass door (17) from the top hinge
and place it on a padded surface to avoid the risk of damage. Then remove the right top hinge
(12). (Figs. 5 & 4)
4. Unscrew and transfer the middle hinge (14) and the middle fixing plate (13) to the opposite
position. (Fig. 5)
5. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the
right hand side.
6. Screw the alternative left top hinge (11), included in the fittings, on the left hand side of cabinet.
(Fig. 4)
7. Relocate the door adapter (16) on the middle hinge.
8. Set the upper glass door to the designated position and install the two lock screws to connect the
door adapter (16) with the upper glass door and tighten them before the door is leveled.
9. Set the lower glass door to the designated position. Then screw the left bottom hinge on the left
designated position and tighten them
10. Recheck and adjust the lower door alignment by loosening the screws (8) & (9) and moving the
door adapter (7) & (10). Tighten the screws (8) & (9) after the door is leveled.
11. Transfer the handles and plugs to the opposite positions. (See Installing the Stainless Steel
Handle.)
2
7
8
9
10
6
11
1
3
5
4
1
2
3
4
5
Loading ...
Loading ...
Loading ...