Loading ...
Loading ...
INSTALLATION
WIRING DIAGRAM
SENSOR INFORMATION
TEST
• Turn the TIME knob anti-clockwise on the
minimum (10S). Turn the LUX knob clock-
wise on the maximum (sun).
• Switch on the power; the sensor and its
connected lamp will have no signal at the
beginning. Aer Warm-up 30sec, the sen-
sor can start work. If the sensor receives the
• Switch o the power.
• Unload the transparent cover.
• Connect the power to connection terminal of sensor according to connection-wire diagram.
• Install back the transparent cover into the original location.
• Fold the metal spring of the sensor upwards and then put the sensor into the suitable hole or
installation box. Releasing the spring, the sensor will be set in this installation position.
• Aer finishing installing, turn on the power and then test it.
Height of Installation: 1.8-4m DETECTION DISTANCE: Max. 8m
Loading ...