INSTRUCTIONS FOR USE
fd and bole warmer
Mayborn ANZ Pty Ltd. (ABN 66 154 703 134)
Mayborn Group is a business name of Mayborn ANZ Pty Ltd.
Please read and keep these instructions
0223214
IMPORTANT WARNINGS!
These instructions can also be found at
www.tommeetippee.com
Keep this instruction sheet for future reference as it
includes important information.
This appliance is intended to be used in household and
similar applications such as: staff kitchen areas in shops,
ofces and other working environments; farm houses;
by clients in hotels, motels and other residential type
environments; bed and breakfast type environments. Do not
use outdoors. Before plugging in the food and bottle warmer
for the rst time ensure that the voltage is compatible with
your electricity supply by checking the label on the base of
the unit. Ensure water has been added to the unit before
switching the unit on. Do not immerse in water. To protect
against re, electric shock and injury to persons do not
immerse cord, plugs or other parts of the unit in water or
other liquid. Misuse of the product may result in the risk of
re, electric shock and/or personal injury. This appliance can
be used by persons aged 14 years and above if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
CAUTION: To prevent damage to the appliance do not use
alkaline cleaning agents when cleaning, use a soft cloth and
a mild detergent. Cleaning and user maintenance shall not be
made by children unless they are aged 14 years and above
and supervised. Keep this appliance and it’s cord out of the
reach of children. This appliance is not intended for use by
persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible
for their safety. Children do not understand the dangers
associated with operating electrical appliances. Never allow
children to use this appliance. The heating element surface is
subject to residual heat after use. Do not touch hot surfaces
use handles and knobs. Ensure that the heating guidelines
are followed to ensure that the food is not heated for too
long. For your child’s safety – Always check food temperature
before feeding by testing on a sensitive part of your skin. Do
not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or has been damaged in any
manner. If the supply cord is damaged it must be changed
by a qualied person in order to avoid a hazard. Always use
on a dry at heat resistant kitchen surface. Do not move
appliance when in use. Do not let the cord hang over edge of
kitchen work surface or touch hot surfaces. The product has
been tted with a cord wind on the base of the unit to allow
you to adjust the length of the cord safely. It is recommended
that the cord be kept as short as possible. Do not use any
accessories other than those supplied with this appliance.
The cord must exit the cable tidy using the exit recess. If the
cord is correctly placed in the tidy the product will sit level. Do
not start using the product if it is not sitting level. Regularly
check the cord and plug for signs of damage, if visible remove
from use immediately. The water inside the unit gets
very hot and can cause burns, please take care when
removing items from the food and bottle warmer. The
unit remains on unless it is switched off at the mains.
USAGE
The speed at which the food and bottle warmer heats the milk or food will depend on the size of the bottle or container
and the starting temperature of the milk or food (e.g. room temperature 20˚C or from the refridgerator 5˚C).
We recommend that setting is always used for heating up, setting is used for keeping warm only. Setting is
a MIN setting and should not be used.
MILK OR FOOD SHOULD NOT BE HEATED FOR OVER 30 MINUTES.
The guide gives an indication of the time you can expect the warmer to take. Maximum average stabilised temperature
is approximately 85˚C
FOR FEEDING BOTTLES
1. Place lled bottle in the food and bottle warmer.
2. Fill the food and bottle warmer with water to the inside edge using a jug or bottle (unless using a 150ml bottle). For
a smaller bottle ll to the underside of the screw ring. Never let the water overow or rise above the neck of the
bottle.
3. Before plugging in, make sure the food and bottle warmer is switched to the setting. Ensure your hands are dry.
4. Plug in the unit to the mains and switch the mains on.
5. Turn dial to setting . The amber light will turn on to indicate the food and bottle warmer is switched on and is
heating up.
6. Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the
temperature of the water. It does not indicate that the milk is ready. Please refer to the timings table in this manual
to nd out how long the milk should be heated for.
7. Heat the milk to the desired temperature. Ensure that the heating guidelines are followed to ensure that the milk is
not heated for too long.
8. Take care when removing the bottle, as it and the surrounding water will be hot.
9. For your child’s safety always check milk temperature before feeding by testing on a sensitive part of your skin.
Take care not to overheat the milk. Gently agitate the bottle prior to feeding.
10. During feeds the bottle can be placed back in the warmer to keep milk warm by using setting .
The thermostat will maintain the temperature of the water. In doing this the indicator light will switch to amber to
indicate the warmer is heating up.
11. Turn back the dial to setting and unplug the unit after feeding.
12. Empty the unit of any water and wipe dry.
FOR BABY JARS
1. Remove the lid and place jar in the food and bottle warmer.
2. Fill the food and bottle warmer with water to the inside edge using a jug or bottle. Ensure the water level is lower
than the rim of the jar.
3. Before plugging in, make sure the food and bottle warmer is switched to the setting .
4. Plug in the unit to the mains and switch the mains on.
5. Turn dial to setting to heat up food. The amber light will turn on to indicate the food and bottle warmer is
switched on and is heating up.
6. Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the
temperature of the water. It does not indicate that the food is ready. To ensure that the food stays at the
temperature you have selected, the thermostat will maintain the temperature of the water. In doing this the
indicator light may switch to amber whilst you are heating the food.
7. Heat food to the desired temperature. Ensure that the heating guidelines are followed to ensure that the food is not
heated for too long. Please refer to table provided in this leaet.
8. Take care when removing the jar, as the surrounding water will be hot.
9. For your child’s safety – Always check food temperature before feeding by testing on a sensitive part of your skin.
Take care not to overheat the food.
10. During feeds the jar can be placed back in the food and bottle warmer to keep food warm by using setting .
The thermostat will maintain the temperature of the water. In doing this the indicator light will switch to amber to
indicate the warmer is heating up.
11. Turn back the dial to setting and unplug the unit after feeding.
12. Empty the unit of any water and wipe dry.
HEATING GUIDELINES
CLEANING
Unplug and allow to cool before cleaning. After each use pour away remaining water from the food and bottle warmer
base by the tipping the food and bottle warmer sideways over a sink and wipe clean with a damp cloth only. Do not
clean with abrasive cleaners or allow to come into contact with solvents or harsh chemicals, damage could result.
DE-SCALING
The frequency of de-scaling should be as follows:
Hard water – 7 days
Medium – 14 days
Soft – 21 days
You can nd out your water quality via your water provider. Unplug the food and bottle warmer and allow to cool before
cleaning. After each use pour away remaining water from the food and bottle warmer base by the tipping the food
and bottle warmer sideways over a sink and wipe clean with a damp cloth only. A build up of limescale can negatively
affect the performance of the food and bottle warmer. We recommend carrying out the descaling process as per above
frequency guidelines to ensure the food and bottle warmer continues to work efciently. Living in a hard water area
can produce limescale quicker than other areas therefore descaling is required sooner. Use a descaler that is suitable
for use with stainless steel and use as per the manufacturer’s guidelines. Alternatively you can use white vinegar to
descale your food and bottle warmer, please use as per manufacturer’s guidelines. Once you have descaled then
perform a nal cleaning cycle. You may need to repeat the process if you nd that limescale is still present. DO NOT
use metal objects or scourers to clean your food and bottle warmer. DO NOT use bleach to clean the food and bottle
warmer. DO NOT use abrasive or anti-bacterial materials.
HEATING GUIDELINES
INITIAL
TEMPERATURE
OF FOOD
setting 3
150ml (5oz)
tommee tippee
closer to nature bottle
260ml (9oz)
tommee tippee
closer to nature bottle
340ml (12oz)
tommee tippee
closer to nature bottle
food jar
113g (4oz)
SETTING
FROM FRIDGE
5˚C (40˚F)
ROOM TEMP
20˚C (70˚F)
5 minutes
4 minutes
8 minutes
6 minutes
10.5 minutes
8 minutes
16 minutes
13 minutes
setting 3 setting 3 setting 3
Mayborn ANZ Pty Ltd.
(ABN 66 154 703 134)
PO Box 475,
Mt Waverley VIC 3149
AUSTRALIA
Newborn Brands (NZ) Ltd.
PO Box 47-677
Ponsonby Auckland 1144
NEW ZEALAND
Mayborn Group is a business name of Mayborn ANZ Pty Ltd.
Copyright © Mayborn (UK) Limited 2018.
TOMMEE TIPPEE is a registered trade mark.
Made in China.
Model number: 1150. Voltage: 220-240V~ 50-60Hz 480W.
Any questions?
Visit our website
tommeetippee.com
or call us FREE on
AUSTRALIA: 1800 096 938
NEW ZEALAND: 0800 726 436
