NuWave 47602 Oxypure Zero Plus Air Purifier User Manual

SMART AIR PURIFIER

OXYPURE ZERO

PLUS

Owner’s Manual

Model: 47602

Rev.1

Amazon Purchases: support@nuwavenow.com All Other Purchases: help@nuwavenow.com

Questions or Concerns?

1-888-502-7805 1-877-689-2838

Mon-Fri 7:30am-4:30pm CST

Master Your OxyPure Zero

Scan the code to watch

how-to videos and more!

2 | nuwavenow.com

Use your smartphone or device to scan the QR code located on the back

of your unit to register your product, or visit Nuwavenow.com/register.

Connect with Us!

#Nuwavenow

Visit Nuwavenow.com to see other great products and accessories.

THANK YOU!

Congratulations on your Nuwave® purchase. We know there are many options available

and sincerely appreciate the trust you have placed in us.

For the last 30 years, we have committed to introducing products that promote healthy

living at affordable prices. By combining the highest quality designs with cutting edge

technology, we strive to blend feature, function, and innovation into every product we

make. We hope you will agree.

We would love to hear from you. Please feel free to reach out with any feedback or

comments that could improve your experience. We would also enjoy hearing about your

successes. Scan the QR code below to email us.

For Amazon Purchases

support@Nuwavenow.com

For All Other Purchases

help@Nuwavenow.com

nuwavenow.com | 3

TABLE OF CONTENTS

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

OWNER’S MANUAL

Important Safeguards ....................................................................................................4-5

Parts & Accessories..........................................................................................................6

Assembly ..........................................................................................................................7

Wi-Fi Connection .............................................................................................................. 8

Operation .....................................................................................................................9-11

Cleaning & Maintenance ...............................................................................................12-14

Troubleshooting Guide .......................................................................................................15

Limited Warranty ...........................................................................................................16-17

U.S Environmental

Protection Agency

Meets California ozone

emissions limit.

CARB certied

4 | nuwavenow.com

14. As with most electrical units, electrical

parts are live even when the OxyPure is

off. Be sure the OxyPure is unplugged

when assembling.

15. DO NOT use the OxyPure in a factory or

industrial setting where machine oil may

be present in the air.

16. Turn the power OFF on the OxyPure

before unplugging it.

17. Unplug the OxyPure from outlet when the

unit is not in use or will be left unattended

for an extended period of time; before

putting on or taking off parts; when

removing or replacing lters; and before

cleaning.

18. DO NOT operate the OxyPure if an ab-

normal sound or motion is detected.

19. If a hard or foreign object comes into

contact with the fan, do not operate. Turn

off and unplug the OxyPure.

20. Inspect the OxyPure for any loose or

missing parts before and after each use.

If parts are loose, damaged, or missing,

contact Customer Service by emailing

For Amazon Purchases:

support@nuwavenow.com

For All other purchases:

help@nuwavenow.com

21. DO NOT pull, lift, drag, pick up, or carry

the OxyPure by its cord.

22. DO NOT block the air inlet or outlet

vents.

23. DO NOT operate the OxyPure without

lters or the Filter Access Panel in place.

24. DO NOT place anything with a strong

odor or chemical on or close to the odor

sensor.

1. ONLY use the OxyPure for its intended

purpose.

2. To protect against the risk of electrical

shock, DO NOT immerse the cord, plug,

or any part of the OxyPure in water or

any other liquid.

3. Close supervision is necessary when

the OxyPure is used by or near children.

The OxyPure is not intended for use by

children, persons with reduced physical,

sensory, or mental capabilities, or those

who lack expertise or knowledge of this

device.

4. DO NOT operate the OxyPure with a

damaged cord, plug, after any malfunc-

tion, or if the unit has been dropped or

damaged in any way. Contact Customer

5. Discard the protective plastic covering

the power plug before use.

6. DO NOT run the cord under carpeting,

throw rugs, runners or other coverings.

7. DO NOT route the cord under furniture or

appliances. Arrange the cord away from

high-trafc areas where it will not pose a

tripping hazard.

8. DO NOT plug the OxyPure into an outlet

or power strip that is being used by other

appliances.

9. Remove any dust or water from the plug,

if needed.

10. ALWAYS set up the OxyPure on a at,

stable surface.

11. DO NOT place objects on top of the

OxyPure.

12. DO NOT sit or stand on, or lean against,

the OxyPure.

13. Alteration or modication of any part of

the OxyPure, or the use of attachments

not recommended by the manufacturer,

may cause re, injury, or damage to

property.

IMPORTANT SAFEGUARDS

NOT INTENDED FOR OUTDOOR USE • HOUSEHOLD USE ONLY

ALWAYS KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.

READ ALL INSTRUCTIONS and WARNINGS: The failure to follow any of the important

safeguards, warnings, or instructions for safe use is a misuse of the OxyPure that can void

your warranty and create the risk of serious injury. When using the OxyPure, basic safety

precautions should always be followed.

nuwavenow.com | 5

IMPORTANT SAFEGUARDS

Power-Supply Cords

A short, detachable power-supply cord is provided to reduce the risk of becoming entangled

in, or tripping over, a longer cord. Longer detachable power-supply cords or extension cords

are available and may be used if care is exercised in their use. If a longer, detachable pow-

er-supply cord or extension cord is used:

• The marked electrical rating of the extension cord should be at least as great as the

electrical rating of the appliance.

• The longer cord should be arranged so that it will not drape over any counter-top or

tabletop where it could be pulled on or tripped over unintentionally.

• The OxyPure should be operated on a separate electrical outlet from other operating

appliances due to wattage limitations.

Filter Changing Precautions

• Once all lters have been removed, wipe down the body of the Oxypure with a warm

damp washcloth. Dry thoroughly before replacing the lters.

6 | nuwavenow.com

PARTS

Front

Back

Air Vent

Part #: OXA1

Filter Slot Cover

Part #: OXP6

Sensor Cover

Part #: OXP3

Ozone Emission

Removal Filter

Part #: OXA16

Bio-Guard

Filter 2

Part #: OXA12

Bio-Guard

Filter 1

Part #: OXA7

Stainless Steel

Pre-Filter

Part #: OXA15

nuwavenow.com | 7

Air Filter Assembly

The OxyPure

comes with four different preassembled filters inside the unit (see

diagram above). Each filter is labeled with a number. Match these with the slot numbers

when installing the filters. When the filters require cleaning, please refer to Cleaning &

Maintenance.

ASSEMBLY

Open Close

Access to Filters

Stainless Steel

Pre-Filter

Bio-Guard

Filter 1 Ozone Emission

Removal Filter

4321

Bio-Guard

Filter 2

Before Use:

1. Make sure the OxyPure is unplugged. Open the Filter

Slot Cover on the back to expose the lters.

2. Remove all tape and pull the lters from their slots using

the tabs or handles.

3. Remove the plastic wrapping from the Stainless Steel

Pre-lter and the Ozone Emission Removal Filter.

(Bio-Guard

lters are not wrapped.)

4. Fully reinsert the lters into the Oxypure and close

the Filter Slot Cover.

5. Remove the sticker from the control panel.

8 | nuwavenow.com

THE NUWAVE

CONNECT APP

MONITOR AND CONTROL THE OXYPURE REMOTELY

Download the Nuwave

Connect App

This is an optional feature that is not required to operate your OxyPure.

Auto Scan Mode

1. Once you download the Nuwave®

Connect app, ensure your phone is

connected to your home Wi-Fi network

and that your phone’s Bluetooth is on.

2. Turn on the OxyPure and activate Wi-Fi

Pairing Mode by pressing and holding

AUTO until the light next to the Wi-Fi

symbol begins to blink rapidly.

3. In the Nuwave® Connect app, tap the +

symbol, then tap Auto Scan and select

your device.

4. Enter your Wi-Fi network’s password

and tap Conrm. If the connection is

successful, the app will display “Added

Successfully” on the screen.

Using the QR reader in your Camera App:

1. Scan the QR code.

2. It will take you to the App’s

download page on either

Google Play Store or the Apple

App Store, then just follow the

download and installation instructions.

Download a QR reader App:

1. Open your mobile app store (Apple App

Store or the Google Play Store).

2. Search for “QR code readers.”

3. Simply download the QR code reader to

your phone, open it and scan the code.

Wi-Fi

Wi-Fi LED Status Light Pairing Mode & Standby Mode

Solid Light. The OxyPure is paired with the Wi-Fi network and ready to be used.

Rapid Blinking Light. The OxyPure is in Pairing Mode. The OxyPure will stay in Pairing Mode for up to 10

minutes or until your device is paired.

Slowly Blinking Light. The OxyPure is in AP Pairing Mode.

AP Mode

1. If you can’t connect your OxyPure using Auto Scan, follow the instructions in the app to

reset the connection process.

2. Press and hold AUTO until the Wi-Fi light begins blinking slowly to enable AP Mode.

3. Tap the + symbol, then select the OxyPure unit you want to add to the network.

4. Conrm that the Wi-Fi light on your OxyPure is blinking slowly and tap AP Mode on your

phone screen.

5. Connect your phone to the available hotspot following the instructions on the screen.

6. Once connected, return to the Nuwave® Connect app and the unit will begin connect-

ing automatically.

7. Once your OxyPure is successfully connected, tap Done.

EZ Mode

1. Tap the + symbol, then select the OxyPure unit you want to add to the network.

2. Enter and conrm your Wi-Fi network password.

3. Tap AP Mode in the top right of your screen, then select EZ Mode to switch pairing modes.

4. Conrm that the Wi-Fi light on your OxyPure is blinking rapidly.

5. Once your OxyPure is connected, tap Done.

nuwavenow.com | 9

OPERATING THE OXYPURE

CONTROL PANEL • POWER • MODES & FUNCTIONS

AIR AND ODOR LEDS

The OxyPure will display the Air/Odor quality based on the particulate matter (PM) in the

air from low to high as represented below. If the PM level in the air exceeds the upper limit

of the range, a warning is triggered with a beeping sound and a ashing LED. To turn off

this warning, press AUTO and Fan Speed at the same time. Press the same buttons to turn

the warning feature back on.

(Low PM Level) (High PM Level)

ODOR

STRONG

ODOR

CLEAN FILTER 2/3

AIR

SLEEP MODE

AUTO

ULTIMATE

CLEAN

FAN

SPEED

TIMER TURBO

HR CLEAN DIRTYHRHIGHLOW

WIFI

ECO MODE

WIFI

RESET FILTER MUTE

OXY 350 BIO

date name rev #

09/27/23

350BIO

control panel

CONTROL PANEL

The OxyPure’s control panel allows you to turn the unit on and off, choose an operating

mode or function (see below), and monitor your lter health.

Particulate Matter (PM) with a diameter of 2.5 microns or less

0~5 5~10 10~20 20~30 30~50 Over 50

Fan Speeds

1 2 3 4 5 6

Air/Odor Quality - Detects particles as small as 2.5/1000mm

(Low Fan Speed) (High Fan Speed)

Ozone Emission

Removal Filter

Pre Filter

Stainless Steel Pre-Filter:

Washable and reusable.

Captures and collects large

particles and allergens including

pet hair, dander, and pollen.

Bio-Guard

™

Filter:

Washable and reusable.

8,000V, charges particles either

positively or negatively to capture

as small as 0.1 microns including

smoke, pollen, and allergens.

Ozone Emission Removal

Filter:

Reusable. DO NOT wash.

Eliminate ozone emissions

and other harmful airborne

chemicals including VOCs and

formaldehyde.

Bio-Guard™

Filter

FILTER FUNCTIONS

Air purifiers operate more efficiently when all windows and doors are closed. The OxyPure

can purify the air in extra-largerooms.

10 | nuwavenow.com

TIMER

Allows you to choose the Oxypure’s duration

of operation from ½ hour, 1, 2, 4, 8, or 12

hours by setting a countdown timer to shut

off the Oxypure or end the current function.

1. Press TIMER. The bar next to ½ hour will

be lit. After pressing timer six times, all

bars will be lit.

2. Press TIMER once more to turn the

TIMER off.

TURBO

Allows you to operate the Oxypure at the

highest fan speed 6 to clean the air for a

selected duration of time from ½ hour, 1,

or 2 hours. To add more time press Timer.

(Cannot run with Fan Speed).

1. Press TURBO to select and set the dura-

tion of operation to ½ hour, 1, or 2 hours.

When the selected time has nished,

TURBO will shut off automatically.

2. To exit TURBO mode, press TURBO until

no bars are lit.

OPERATING THE OXYPURE

OPERATING BUTTONS

POWER ON/OFF

1. Plug your OxyPure into an outlet. The

POWER button will be lit red for standby

mode.

2. Press POWER. The OxyPure will turn on

and the POWER button will be lit green.

3. Each bar around AIR and ODOR will

illuminate, this is measuring current air

quality while the fan is on.

4. Press POWER again to turn the OxyPure

off.

• When you select a different mode other

than the default AUTO before turning

off, the OxyPure will run the previously

selected mode when it is powered back

on.

AUTO

Allows your OxyPure to adjust the fan speed

automatically (No time limit, cannot run with

Fan Speed and Ultimate Clean).

1. Press AUTO. The AUTO light will be lit.

2. Press AUTO again to turn off function.

ULTIMATE CLEAN

Allows your Oxypure to automatically adjust

to the highest fan speed based on your air

quality. (No time limit, cannot run with Auto).

1. Press ULTIMATE CLEAN. The ULTI-

MATE CLEAN light will be lit green.

2. Press ULTIMATE CLEAN again to turn

it off.

FAN SPEED

Allows you to adjust the Oxypure’s fan

speed to 6 different speeds (LOW to HIGH).

(Cannot run with Auto and Turbo).

1. Press FAN SPEED to adjust.

2. To go back to the lowest fan speed, press

FAN SPEED until the rst green bar is lit.

ULTIMATE

CLEAN

AUTO

FAN

SPEED

HIGHLOW

TIMER

TURBO

ODOR

STRONG

ODOR

CLEAN FILTER 2/3

AIR

SLEEP MODE

AUTO

ULTIMATE

CLEAN

FAN

SPEED

TIMER TURBO

HR CLEAN DIRTYHRHIGHLOW

WIFI

ECO MODE

WIFI

RESET FILTER MUTE

OXY 350 BIO

date name rev #

09/27/23

350BIO

control panel

CONTROL PANEL

nuwavenow.com | 11

OPERATING THE OXYPURE

WIFI

Allows you to connect the OxyPure to your

Wi-Fi network.

1. Press and hold AUTO to initiate Wi-Fi

pairing function. See page 8 for details.

ECO MODE

Allows you to save energy by keeping

the Oxypure fan off until it’s needed. The

POWER button will be lit yellow.

1. Press and hold ULTIMATE CLEAN for

2 seconds to activate. The Power icon

backlight will be yellow while ECO MODE

is on.

2. Press and hold ULTIMATE CLEAN for 2

seconds again to deactivate ECO MODE.

SLEEP MODE

Allows your Oxypure fan to still be active

while the LED lights are turned off. Adjust the

fan speed to your preference prior to turning

on sleep mode.

1. Manually set FAN SPEED to desired

setting.

2. Press and hold FAN SPEED for 2 sec-

onds again to activate SLEEP MODE.

3. To turn off SLEEP MODE, press any

button.

NOTE: ULTIMATE CLEAN and TURBO will

work while the Oxypure is in SLEEP MODE.

AIR QUALITY INDICATOR

The OxyPure will automatically measure and

display the current air quality in the room.

The colored bars around AIR will illuminate,

increasing and decreasing according to air

quality. See page 9 for details on AIR/ODOR

QUALITY.

ODOR QUALITY INDICATOR

The OxyPure will automatically measure

and display the current odor quality in the

room. The colored bars around ODOR

will illuminate, increasing and decreasing

according to odor quality. See page 9 for

details on AIR/ODOR QUALITY.

MUTE

Press and hold TURBO until 2 beeps are

heard.

1. Repeat to unmute.

ODOR

STRONG

ODOR

WIFI

MUTE

CLEAN DIRT

AIR

ECO MODE

SLEEP MODE

12 | nuwavenow.com

Before First Use

Wipe the Top Vent and In Flow Vent with a slightly damp cloth or paper towel. Dry thoroughly

before use.

After Use

Your OxyPure should be cleaned periodically and after excessive use to ensure proper

performance and function. Be sure the OxyPure is off and unplugged.

Cleaning the Base of the OxyPure

Use a cloth, paper towel, duster, or vacuum brush attachment to remove dust and other

particles from the vents. Clean tougher buildup with a dampened cloth with soap and warm

water. Dry thoroughly.

1. At the back remove the Filter Slot Cover

using built-in handles or tabs.

2. Slide out the lter to be cleaned.

3. After washing allow the Filters to

thoroughly dry before re-inserting (12-24

hours)

• Ensure the Filter Slot Cover is properly

aligned and secure when reattaching.

CLEANING & MAINTENANCE

Your OxyPure can easily be moved from one location to

another. Just hold the OxyPure by the handles on each side

and roll the OxyPure to the chosen location. The wheels

underneath provide extra maneuverability and mobility

whenever it’s needed.

Handles

Wheels

CLEANING THE FILTERS

The filters need to be cleaned on schedule to maintain optimum performance.

nuwavenow.com | 13

RESETTING FILTERS 2 & 3

1. Press and hold TIMER for 2 seconds,

until 2 beeps are heard.

2. The CLEAN FILTER 2/3 light turns off and

the 1st bar on the Air indicator will be lit.

CLEAN THE OZONE EMISSION

REMOVAL FILTER:

Cleaning depends on usage.

1. Remove the Filter from slot .

2. Use a vacuum with a brush

attachment and vacuum up

and down then side to side.

3. Flip and repeat to vacuum the

other side of the Filter.

4. Repeat this process on the

other side.

CLEANING THE DUST SENSOR

The Dust Sensor requires regular cleaning

(approximately every 3 months) for the unit

to operate efciently.

1. Open the Dust Sensor Cover.

2. Using a dry cotton swab remove any

dirt or dust from the Dust Sensor. Can

use a slightly wet cotton swab for heavy

buildup.

3. Remove any moisture with a dry cotton

swab.

• If your OxyPure is set up in an area with

high dust accumulation, more frequent

cleaning of the Dust Sensor is needed.

WARNING

DO NOT Immerse, wash or wipe with

water, this will result in permanent damage

to the Ozone Filter. It must be replaced!

CLEAN STAINLESS STEEL PRE-FILTER:

Clean every 2 months depending on use.

1. Use a vacuum with a

brush attachment.

2. Clean the Filter with warm

soapy water.

3. Rinse the Filter thoroughly

and remove any soap particles.

4. Allow the Filter to dry completely BEFORE

placing it into slot using the tabs.

1. Remove the Filter (2/3) using

the handles.

2. Spray the Filter with a mild

degreaser or dish soap and let

it sit for 2-3 minutes.

3. Submerge the Filter in warm

water, shake, and remove.

4. Repeat this process until the Filter water

is clean.

5. Dry the Filter completely before inserting

in their proper slots, 2 or r .

• Note: The Bio-Guard™ Filter may

discolor and retain odor after prolonged

exposure to thick smoke and strong

odors. This prolonged exposure will

require more frequent cleanings to ensure

maximum ltration efciency.

Ozone Emission

Removal Filter

CLEANING & MAINTENANCE

2 3

Bio-Guard

™

Filter 2

Pre Filter

Clean Filter 2 & 3 Schedule

3 Months Yellow Routine cleaning.

6 Months Orange Should be cleaned for

continued efficiency.

Months

Red Clean for optimal

performance

especially if the first 2

were missed.

CLEAN FILTER 2 & 3

The Bio-Guard™ Filters should or must

be cleaned according to the Cleaning Chart.

CLEANING THE UNIT

14 | nuwavenow.com

CLEANING & MAINTENANCE

1. Turn off and unplug the OxyPure.

2. Use a vacuum with a brush attachment to remove any dust

and debris.

3. If needed, use a paper towel or cloth slightly dampened to

remove heavier buildup. Do not use any harsh abrasives

or cleaning pads on the Top Vent or any other part of the

OxyPure.

To clean fan area or check for a foreign object.

1. Remove the screws as shown and set on the magnetic

strip.

2. Lift off the vent as shown.

3. Can wipe the side walls with a cloth or duster.

4. Replace the vent and screws

Note: Careful to unscrew at the small inner vent, as not to

void the warranty.

CLEANING THE TOP VENT AND INFLOW VENT

Depending on the environment the Oxypure is placed in, more frequent cleaning may be

needed.

CLEANING THE FILTER SENSOR

The Filter Sensor is located on the back, above the Filter Slot Cover.

1. Open the panel (Sensor Cover).

2. Using a dry cotton swab or small, soft brush, gently remove any

dirt or dust from the Sensor.

3. For heavier buildup on the Sensor, wipe it with a slightly wet

cotton swab.

4. Remove any moisture with a dry cotton swab.

• The Filter Sensor requires regular cleaning (approx. every 3

months) for the OxyPure to operate efciently.

• If your OxyPure is set up in an area with high dust accumulation,

more frequent cleaning of the Filter Sensor is needed.

• DO NOT use the cotton swab on any part or area other than the

Filter Sensor.

CLEANING THE ODOR SENSOR OPENING

The Odor Sensor is located on the upper right side corner of the

OxyPure underneath the small grill opening. Dust and debris may

accumulate.

1. Use a vacuum brush attachment and gently brush the grill.

• DO NOT tamper or spray inside or near the odor sensor. This may

cause the sensor to malfunction and void the warranty.

Odor Sensor

ODOR

STRONG

ODOR

CLEAN FILTER 2/3

AIR

SLEEP MODE

AUTO

ULTIMATE

CLEAN

FAN

SPEED

TIMER TURBO

HR CLEAN DIRTYHRHIGHLOW

WIFI

ECO MODE

WIFI

RESET FILTER

MUTE

Top Vent

Inflow Vent

TOP

BOTTOM

Sensor Cover

nuwavenow.com | 15

TROUBLESHOOTING GUIDE

The OxyPure does not turn on.

1. The plug is not in the wall outlet. Plug into wall outlet.

2. POWER on the touchpad panel is not on. Press the POWER button.

3. The Filter Slot Cover in the back rear is off or loose. Make sure Filter Slot Cover is on securely. Check that the

tabs are not damaged or broken off.

4. Be sure the filters are secure in their designated slots. Pull each filter out partially, then securely slide back into its

slot.

5. Check if the Oxypure is on sleep mode.

TIMER does not work when pressed.

The OxyPure is not reading the function selected. Press FAN SPEED or AUTO, then press TIMER.

The fans are not blowing.

1. An appropriate outlet is not being used. Make sure outlet has appropriate voltage for use.

2. The Filter Slot Cover in back rear is not properly in place. Make sure Filter Slot Cover is on securely.

3. Check the Air Vent for obstructions. See page 15 on how to remove the Inner Vent Screen.

Speed of the airow is not changing when FAN SPEED is pressed.

The OxyPure may be in AUTO mode. Set the OxyPure to another operating mode on the touchpad then press FAN

SPEED.

Airow from the Top Vent is weak.

The air filter(s) are dirty. Clean the air filters.

The OxyPure is producing smoke or odor.

The air filter(s) are dirty. Clean the air filters.

CLEAN 2/3 FILTER Indicator has not reset after the lter(s) have been changed

1. The Filter Sensor is not reading the reinstalled filter(s). Turn the OxyPure off then on again. Press and hold down

TIMER for 2 seconds until a beep is heard.

2. Turn the OxyPure off, unplug and adjust the filter(s) by removing and reinstalling them into their proper slots. Plug

in and turn the OxyPure ON again.

3. The Filter Slot Cover in back rear is not securely in place. Make sure Filter Slot Cover is on securely.

4. The Filter Sensor is dirty. Clean the Filter Sensor.

ULTIMATE CLEAN does not come on when pressed.

The OxyPure is not reading the function selected. Turn the OxyPure on and off by pressing POWER twice.

Power is blinking red.

1. The Bio-Guard® filter is not properly installed or is loose. Turn off and unplug the OxyPure. Check that the filters

#1 and #2 are properly installed into their correct slots and are not loose. Plug in the OxyPure and press POWER

to turn it on.

2. When the Filter Slot Cover is removed,POWER will be backlit solid red. Pressing POWER will make it blink.

However, as a safety measure, the OxyPure will not operate when the Filter Slot

3. Cover is removed. Ensure that Filter Slot Cover is installed securely.

Speed of the airow is not changing when FAN SPEED is pressed.

1. Place and run the OxyPure manually for 8 hours in a different room.

2. Clean the odor and filter sensors. If the problem persists, contact Customer Service by emailing:

For Amazon Purchases: support@nuwavenow.com For All Other Purchases: help@nuwavenow.com

16 | nuwavenow.com

THE MANUFACTURER WARRANTS

Nuwave, LLC warrants that the OxyPure Zero® Plus will be free from manufacturer defects for 5 years

from the date of purchase, under normal household use, and when operated in accordance with the

Manufacturer’s written instructions. The Limited Warranty covers the Original Purchaser only. The

Manufacturer will provide the necessary parts and labor to repair the product at the Nuwave LLC Service

Department. After the expiration of the warranty, the cost of the parts and labor will be the responsibility

of the owner.

THE WARRANTY DOES NOT COVER

The Limited Warranty is voided if repairs are made by an unauthorized dealer, or the serial number data

plate is removed or defaced. Normal deterioration of nish due to use or exposure is not covered by this

Warranty. This Limited Warranty does not cover failure, damages, or inadequate performance due to

accident, acts of God (such as lightning), uctuations in electric power; alterations, abuse, misuse, mis-

applications, corrosive-type atmospheres, improper installation; failure to operate and maintain the unit

in accordance with the Manufacturer’s written instructions; failure to regularly clean and maintain the unit

and reusable lters in accordance with the Manufacturer’s written instructions; abnormal, commercial, or

rental uses; or resold units. Nuwave LLC reserves the right to void the Limited Warranty, where allowable

by law, for products purchased from an unauthorized dealer.

TO OBTAIN SERVICE

The owner shall have the obligation and responsibility to pay for all services and parts not covered by the

warranty; prepay the freight to and from Service Department for any part or system returned under this

warranty; and carefully package the product using adequate padding material to prevent damage in tran-

sit. The original container is ideal for this purpose. Include in the package the owner’s name, address,

daytime telephone number, a detailed description of the problem, and RGA (Return Goods authorization

number). To obtain the RGA number, email us at:

For Amazon Purchases: support@nuwavenow.com

For All Other Purchases: help@nuwavenow.com

Provide the product model & serial number and proof of date of purchase (a copy of the receipt) when

making claims under this warranty.

MANUFACTURER’S OBLIGATION

The Manufacturer’s obligation under this Limited Warranty is limited, to the extent allowable by law, to

repairing or replacing any part covered by this Limited Warranty which upon examination is found to

be defective under normal use. The Limited Warranty is applicable only within the continental United

States and only to the original purchaser of the manufacturer’s authorized channels of distribution.THE

LIMITED WARRANTY MAY NOT BE ALTERED, VARIED OR EXTENDED EXCEPT BY A WRITTEN

INSTRUMENT EXECUTED BY THE MANUFACTURER. THE REMEDY OF REPAIR OR REPLACE-

MENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS EXCLUSIVE. IN NO EVENT SHALL THE

MANUFACTURER BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON, WHETHER OR NOT OCCA-

SIONED BY NEGLIGENCE OF THE MANUFACTURER, INCLUDING WITHOUT LIMITATION, DAM-

AGES FOR LOSS OF USE, COSTS OF SUBSTITUTION, PROPERTY DAMAGE, OR OTHER MONEY

LOSS.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation exclusions may not apply. This Limited Warranty gives specic legal rights, and there

may also be other rights which vary from state to state.

EXCEPT AS OTHERWISE EXPRESSLY PROVIDED ABOVE, THE MANUFACTURER MAKES

NO WARRANTIES EXPRESSED OR IMPLIED ARISING BY LAW OR OTHERWISE, INCLUDING

WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

LIMITED WARRANTY

nuwavenow.com | 17

LIMITED WARRANTY

A PARTICULAR PURPOSE TO ANY OTHER PERSON. READ YOUR OWNER’S MANUAL. IF YOU

STILL HAVE ANY QUESTIONS ABOUT OPERATION OR WARRANTY OF THE PRODUCT, PLEASE

CONTACT NUWAVE LLC.

DISPUTE RESOLUTION PROCEDURE

For disputes relating to use of the website or use or purchase of a Nuwave product or service (collective-

ly “Disputes”), you agree to rst contact Nuwave LLC at legal@nuwavenow.com. If we cannot resolve

your dispute informally, any and all disputes shall be submitted to nal and binding arbitration. You may

start the arbitration process by submitting in writing a demand to the American Arbitration Association

(“AAA”) and sending a copy to Nuwave. Nuwave will pay all ling costs. A single arbitrator of the AAA will

conduct the arbitration in a location convenient to you or by phone. The arbitrator’s award will be binding

and may be entered as a judgment in a court of competent jurisdiction. The arbitration will be conducted

in accordance with the provisions of AAA’s Commercial Arbitration Rules and Mediation Procedures in

effect at the time of submission of your demand for arbitration. See https://www.adr.org/sites/default/les/

CommercialRulesWeb.pdf. Except as may be required by law as determined by an arbitrator, no party or

arbitrator may disclose the existence, content, or results of any arbitration hereunder without prior written

consent of both parties.

A. WAIVER OF RIGHT TO SUE. By agreeing to arbitration, you understand that, to the maximum extent

permitted by law, you are agreeing to waive your right to le suit in any court, to a court hearing, a judge

trial, or a jury trial.

B. CLASS ACTION WAIVER. To the maximum extent permitted by law, you expressly agree to refrain

from bringing or joining any claims in any representative or class-wide capacity, including but not limited

to, bringing or joining any claims in any class action or class-wide arbitration.

C. OPT OUT PROCEDURE. To request to opt out of arbitration you must contact Nuwave LLC at legal@

nuwavenow.com, Nuwave LLC, 560 Bunker Ct., Vernon Hills, IL 60061, U.S.A. You will have thirty (30)

days from the date of product delivery to opt out of arbitration with respect to any dispute arising out of

or relating to use or purchase of any Nuwave product. If more than 30 days have passed, you are not

eligible to opt out of arbitration and will have waived your right to sue or participate in a class action with

respect to the dispute arising out of your purchase or use of a Nuwave product. For any dispute arising

out of your use of Nuwave’s website, you have thirty (30) days from the date you provided information to

the website to opt out of arbitration. If more than 30 days have passed, you are not eligible to opt out of

arbitration and you will have waived your right to sue and participate in a class action with respect to the

dispute arising out of your use of Nuwave’s website.

D. SOME MATTERS ARE NOT SUBJECT TO ARBITRATION. Notwithstanding the foregoing, the

following shall not be subject to arbitration and may be adjudicated only in the state and federal courts

of Illinois: (i) any dispute, controversy, or claim relating to or contesting the validity of our intellectual

property rights and proprietary rights, including without limitation, patents, trademarks, service marks,

copyrights, or trade secrets; (ii) an action by a party for temporary, preliminary, or permanent injunctive

relief, whether prohibitive or mandatory, or other provisional relief; or (iii) interactions with governmental

and regulatory authorities. You expressly agree to refrain from bringing or joining any claims in any rep-

resentative or class-wide capacity, including but not limited to, bringing or joining any claims in any class

action or any class-wide arbitration.

18 | nuwavenow.com

READ YOUR OWNER’S MANUAL

If you still have any questions about operation or warranty of this product, please contact

NuWave LLC by emailing:

For Amazon Purchases: support@nuwavenow.com

For All Other Purchases: [email protected].

Para la versión en español de este manual,

visita www.nuwavenow.com.

nuwavenow.com | 19

NOTES

SMART AIR PURIFIER

OXYPURE ZERO

PLUS

Item: BM47602

Rev.1-V4-YK

07-08-24

Questions or Concerns?

Amazon Purchases: support@nuwavenow.com All Other Purchases: help@nuwavenow.com

1-888-502-7805 1-877-689-2838

Mon-Fri 7:30am-4:30pm CST

Master Your OxyPure Zero Plus

Scan the code to watch

how-to videos and more!

www.nuwavenow.com

FOR HOUSEHOLD USE ONLY

120VAC / 60 Hz / 105 Watts

Model:

47602

For patent information please go to:

www.nuwavenow.com/legal/patent

Designed & Developed in USA

Nuwave LLC

560 Bunker Ct.

Vernon Hills, IL 60061, U.S.A.

Made in China

EPA Establishment Number: 101594-CHN-1

NuWave 47602 Oxypure Zero Plus Air Purifier

Product's Documents

User Manual

Specifications

NuWave 47602 Questions and Answers