Loading ...
Loading ...
Loading ...
8
Specifica�on
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
7
Model
DS-PDD12P-EG2-WB/WE
Detec�on
Performance
Detec�on Method Passive Infrared,Microwave
Sensor Model SFG321-711
Detec�on Range 12m
Detec�on Angle 85.9°
Detec�on Zones 52
Detectable Speed 0.3 to 2m/s
Sensi�vity Auto,High,Pet
Pet Immunity 30Kg
White Light Filter 6500lux
Microwave Frequency
24GHz(24.15～24.25GHz)
Digital Temperature Compensa�on Support
Creep Zone Protec�on Support
Feature
Digital Processing Support
Sealed Op�cs Support
Tamper Protec�on Front,Rear
Environment Temperature Indicator Support
Signal Strength Indicator Support
Interface
Power Switch Power Up Enrolling
LED Indicator Green(PIR), Red(Microwave), Blue(Alarm)
Transmission
Transmission Technology Tri-X Wireless
Transmission Method Two-Way RF Wireless
Transmission Frequency 433MHz/868MHz
Transmission Security AES-128 Encryp�on
Transmission Range(Free Space) 1.2 Km(433MHz)/1.6 Km(868MHz)
Frequency Hopping Support
Enrolling Method Power up,Remote ID,QR Code
Electrical
Characteris�cs
Power Supply Ba�ery Powered
Ba�ery Type CR123A × 2
Typical Voltage 3V
Standard Ba�ery Life 5 Years
General
Opera�on Temperature -10 °C to 55 °C (14 °F to 131 °F)
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Opera�on Humidity 10% to 90%
Dimension(WxHxD) 65.5mm × 103mm × 48.5mm
- The device for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ven�la�on or heat source such as heater or radiator is forbidden (ignorance
can cause fire danger).
- Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a
malfunc�on however), and affec�ng the endurance of sensor at the same �me.
- Improper use or replacement of the ba�ery may result in hazard of explosion. Replace with the same or equivalent type
only. Dispose of used ba�eries according to the instruc�ons provided by the ba�ery manufacturer.
- Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur.
- Do not expose the device to the explosive situa�on.