Loading ...
Loading ...
Loading ...
Conī®rm
Input your dial-up password again.
4.
Click Save.
5.
Access the device.
By Browsers Enter the WAN dynamic IP address in the browser address bar to access
the device.
By Client Soīware Add the WAN dynamic IP address to the client soīware. Refer to the
client manual for details.
Note
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes
aīer rebooīng the camera. To solve the inconvenience of the dynamic IP, you need to get a
domain name from the DDNS provider (e.g. DynDns.com). Refer to Access to Device via Domain
Name for detail informaīon.
2.7.8 Wireless Dial
Data of audio, video and image can be transferred via 3G/4G wireless network.
Note
The funcīon is only supported by certain device models.
Set Wireless Dial
The built-in wireless module oī«ers dial-up access to the Internet for the device.
Before You Start
Get a SIM card, and acīvate 3G/4G services. Insert the SIM card to the corresponding slot.
Steps
1.
Go to Conī®guraīon ā Network ā Advanced Seī«ngs ā Wireless Dial .
2.
Check to enable the funcīon.
3.
Click Dial Parameters to conī®gure and save the parameters.
4.
Click Dial Plan. See
Set Arming Schedule for detailed informaīon.
5.
Click Dial Status.
Click Refresh Refresh the dial status.
Click Disconnect Disconnect the 3G/4G wireless network.
When the Dial Status turns to Connected, it means a successful dial.
6.
Access the device via the IP Address of the computer in the network.
-
Input the IP address in the browser to access the device.
Network Camera User Manual
63
Loading ...
Loading ...
Loading ...