Loading ...
Loading ...
Loading ...
Network Video Recorder User Manual
52
You can also click-and-drag the camera to the desired window on the live view interface to set the
camera order.
Related Operation:
1) Click button to start live view for all the channels.
2) Click to stop all the live view.
Click Apply to save the settings.
Configure Auto-Switch of Cameras
You can set the auto-switch of cameras to play in different display modes.
Go to System > Live View > General.
Set the video output interface, live view mode and dwell time.
Video Output Interface: Select the video output interface.
Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.
Dwell Time: The time in seconds to dwell between switching of cameras when enabling auto-
switch. The range is from 5s to 300s.
Go to View Settings to set the view layout.
Click OK to save the settings.
Configure Channel-zero Encoding
Purpose:
You can enable the channel-zero encoding when you need to get a remote view of many
channels in real time from web browser or CMS (Client Management System) software, in order
to decrease the bandwidth requirement without affecting the image quality.
Go to System > Live View > General.
Select the video output interface to Channel-Zero.
Go to System > Live View > Channel-Zero.
Check the checkbox to enable the channel-zero.
Loading ...
Loading ...
Loading ...